Difficulty

Easy

Steps

7

Time Required

                          10 - 20 minutes            

Sections

2

  • Back Case
  • 4 steps
  • Solid State Drive
  • 3 steps

Flags

0

  • BackASUS TUF Gaming FX505DY

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Solid state drives are more reliable than hard drives, but are prone to overheating and more expensive. These drives contain no moving parts, making them less susceptible to drops or impacts. They can still be damaged by them, and due to their thin size can crack. Solid state drives can be overwritten more times than a hard drive and are more stable. Lifespan is generally measured in full write cycles, with lifespans potentially exceeding 10,000 cycles. In years, solid state drives can last over ten years in optimal conditions.

A faulty solid state drive or full solid state drive can cause the ASUS TUF Gaming FX505DY to not boot to the operating system or have trouble reading and writing to the drive. Check the troubleshooting guide before replacing the drive, as many relevant issues are caused by software or infections. A full solid state drive can be replaced by one with more storage, but backups should be made, and if the full drive is the boot drive, a copy of the operating system installation disk should be made or acquired first.

If your drive has anything of value you want to keep, make a backup or move the files to a new disk first. To prevent data or identity theft, ensure your old drive has been properly cleaned and wiped or destroyed before recycling. Recycling can be done through local partners or online. One such program is run by Western Digital on their website.

Make sure to fully shut down the device and unplug any chargers and peripherals before beginning.

What you need

Step 1

              Back Case               
  • Turn off the laptop.
  • Disconnect the charging cable.
  • Failure to disconnect the charging cable and power down the computer could result in personal or property damage.
  • Flip the laptop so the back is facing up.

Turn off the laptop.

Disconnect the charging cable.

Failure to disconnect the charging cable and power down the computer could result in personal or property damage.

Flip the laptop so the back is facing up.

1024

Step 2

  • Remove the five 6 mm screws securing the back panel using a Phillips #1 screwdriver.
  • Remove the six 13 mm screws securing the back panel using a Phillips #1 screwdriver.

Remove the five 6 mm screws securing the back panel using a Phillips #1 screwdriver.

Remove the six 13 mm screws securing the back panel using a Phillips #1 screwdriver.

Step 3

  • Insert the plastic opening tool at a corner and pry up along the edges, leaving the back side with the hinges for last.
  • Do not insert the opening tool too far into the laptop to avoid damaging internal components.

Insert the plastic opening tool at a corner and pry up along the edges, leaving the back side with the hinges for last.

Do not insert the opening tool too far into the laptop to avoid damaging internal components.

Step 4

  • Gently lift up the back panel to release any remaining clips on the side with the hinges and remove the panel.

Gently lift up the back panel to release any remaining clips on the side with the hinges and remove the panel.

Step 5

              Solid State Drive               
  • Remove the two 3 mm screws holding the solid state drive and its foil wrap in place using a Phillips #1 screwdriver.
  • The drive will pop up at an angle.

Remove the two 3 mm screws holding the solid state drive and its foil wrap in place using a Phillips #1 screwdriver.

The drive will pop up at an angle.

Step 6

  • Slide the foil wrap off of the drive.

Slide the foil wrap off of the drive.

Step 7

  • Remove the solid state drive by pulling it at an angle from the motherboard.

Remove the solid state drive by pulling it at an angle from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Benyamin Claxton                     

Member since: 03/27/2022

701 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       UMass Dartmouth, Team 2-4, Mellen Spring 2022                        

                                                  Member of UMass Dartmouth, Team 2-4, Mellen Spring 2022 



                    UMASSD-MELLEN-S22S2G4                     


                                            4 Members                     


                                            8 Guides authored