Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes

Sections

3

  • Back Cover
  • 2 steps
  • Battery
  • 2 steps
  • Track pad
  • 4 steps

Flags

0

  • BackAsus TUF Gaming FX705G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove the eleven Phillips #0 screws that secure the back cover.

Remove the eleven Phillips #0 screws that secure the back cover.

1024

Step 2

  • Use the iFixit opening tool to lift the back cover’s seam, then insert the spudger parallel to the back cover and lift gently upward.
  • You will hear pops as the back cover releases.

Use the iFixit opening tool to lift the back cover’s seam, then insert the spudger parallel to the back cover and lift gently upward.

You will hear pops as the back cover releases.

Step 3

              Battery
  • Remove the three Phillips #00 screws from the battery housing.

Remove the three Phillips #00 screws from the battery housing.

Step 4

  • Disconnect the wire from the motherboard, and lift the battery from its housing.

Disconnect the wire from the motherboard, and lift the battery from its housing.

Step 5

              Track pad
  • Take the ribbon wire out of the track pad.

Take the ribbon wire out of the track pad.

Step 6

  • Use a Phillips #00 screwdriver to remove the two screws holding the track pad in place.

Use a Phillips #00 screwdriver to remove the two screws holding the track pad in place.

Step 7

  • Take the ground wire ribbon and pry it off of the motherboard housing with tweezers.

Take the ground wire ribbon and pry it off of the motherboard housing with tweezers.

Step 8

  • Use the iFixit opening tool to pry the track pad up slightly at the top and pull the latch at the top to free the track pad.
  • Slide the track pad up and out of the housing unit.

Use the iFixit opening tool to pry the track pad up slightly at the top and pull the latch at the top to free the track pad.

Slide the track pad up and out of the housing unit.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Britney Smit

Member since: 10/15/2019

426 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Grand Valley State University, Team S4-G5, DeVasto Fall 2019                        

                                                  Member of Grand Valley State University, Team S4-G5, DeVasto Fall 2019 



                    GVSU-DEVASTO-F19S4G5                     


                                            4 Members                     


                                            6 Guides authored