Asus U30Sd Xa1 Ram Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 15 minutes

Sections

RAM
4 steps

Flags

BackAsus Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

RAM

Before removing the RAM, shut down your laptop and unplug the power adapter.
Turn the laptop over onto a flat surface.

Before removing the RAM, shut down your laptop and unplug the power adapter.

Turn the laptop over onto a flat surface.

1024

Step 2

At the top center on the back of the device, you will see a small square panel.
Use a Phillips screwdriver to remove two screws located on the panel.

At the top center on the back of the device, you will see a small square panel.

Use a Phillips screwdriver to remove two screws located on the panel.

Step 3

Ground yourself from electrostatic discharge by touching any metal objects or use your anti-static gloves.
System memories are very sensitive to static electricity.
Push apart the latches on either side of the slot that hold the RAM in place, but gently.
Use firm pressure as needed. You will hear the RAM pop out of the slot.
Take the RAM stick out carefully, and set it aside on an anti-static surface.

Ground yourself from electrostatic discharge by touching any metal objects or use your anti-static gloves.

System memories are very sensitive to static electricity.

Push apart the latches on either side of the slot that hold the RAM in place, but gently.

Use firm pressure as needed. You will hear the RAM pop out of the slot.

Take the RAM stick out carefully, and set it aside on an anti-static surface.

Step 4

To replace the RAM, take and hold the new RAM by the sides, with the gold edge facing down towards the device.
Make sure your hands are clean and do not let your fingerprints get on the memory.
Line up the top corners of the new RAM with the top edges of the now empty panel.
Slide the RAM into the slot until it’s firmly in place.
Once you hear the RAM stick click into place, you’ll know you did it correctly.
Now just screw the panel door back on and you’re finished!

To replace the RAM, take and hold the new RAM by the sides, with the gold edge facing down towards the device.

Make sure your hands are clean and do not let your fingerprints get on the memory.

Line up the top corners of the new RAM with the top edges of the now empty panel.

Slide the RAM into the slot until it’s firmly in place.

Once you hear the RAM stick click into place, you’ll know you did it correctly.

Now just screw the panel door back on and you’re finished!

Your new ASUS U30SD-XA1 RAM is ready to go. Now your device should run and work faster!

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 7 other contributors

                    Julie M Paul

Member since: 07/17/2015

164 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Texas Tech, Team 3-1, Rauch SU 2015                        

                                                  Member of Texas Tech, Team 3-1, Rauch SU 2015 



                    TTU-RAUCH-SU15S3G1                     


                                            3 Members                     


                                            1 Guide authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team