Difficulty
Moderate
Steps
5
Time Required
4 minutes
Sections
1
- RAM
- 5 steps
Flags
0
BackASUS U46E-RAL7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Using a size 0 Phillips screwdriver, remove two (2) 5mm screws from the L shaped back panel.
Using a size 0 Phillips screwdriver, remove two (2) 5mm screws from the L shaped back panel.
1024
Step 2
- Using a plastic opening tool, pop off the L shaped panel.
Using a plastic opening tool, pop off the L shaped panel.
Step 3
- Place both index fingers on the metal bars on the edge of the ram.
- Press down gently until the RAM pops up.
Place both index fingers on the metal bars on the edge of the ram.
Press down gently until the RAM pops up.
Step 4
- Pull the RAM stick out of the socket.
Pull the RAM stick out of the socket.
Step 5
- Repeat steps 1-4 for the second stick of RAM.
Repeat steps 1-4 for the second stick of RAM.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Connor
Member since: 01/19/2017
114 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
Eastern Washington University, Team 1-1, Mathisen Winter 2017
Member of Eastern Washington University, Team 1-1, Mathisen Winter 2017
EWU-MATHISEN-W17S1G1
4 Members
6 Guides authored
