Difficulty
Moderate
Steps
5
Time Required
15 - 25 minutes
Sections
2
- Battery
- 2 steps
- Keyboard
- 3 steps
Flags
0
BackAsus U50F-RBBAG05
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This replacement can help if some keys are sticking or not working at all, as well as let you see if there is any debris under the keyboard that may need to be cleared out. This also helps if you need to replace any keys, as it would be best to do so when the keyboard is not attached to the laptop.
BE CAREFUL as the keyboard is delicate and must be lifted out carefully to avoid any damage.
What you need
Step 1
Battery
- Turn the laptop over so the bottom is facing up.
- Slide the two tabs on the bottom of the laptop toward the edges of laptop.
- Slide the left tab to the left to lock it into the unlocked position. The red showing next to the tab signifies that it’s unlocked.
- You will have to hold the right tab to the right to keep the slot unlocked while removing the battery.
Turn the laptop over so the bottom is facing up.
Slide the two tabs on the bottom of the laptop toward the edges of laptop.
Slide the left tab to the left to lock it into the unlocked position. The red showing next to the tab signifies that it’s unlocked.
You will have to hold the right tab to the right to keep the slot unlocked while removing the battery.
1024
Step 2
- Hold down the tab on the right side, then begin sliding the battery out.
- Remove the old battery.
- Next, insert the new battery into the empty slot. Release the right tab to begin locking the new battery into place. Slide the left tab to the right to completely lock the battery into the slot. The red that was showing near the left tab should be gone. This signifies that the battery is locked into place.
Hold down the tab on the right side, then begin sliding the battery out.
Remove the old battery.
Next, insert the new battery into the empty slot. Release the right tab to begin locking the new battery into place. Slide the left tab to the right to completely lock the battery into the slot. The red that was showing near the left tab should be gone. This signifies that the battery is locked into place.
Step 3
Keyboard
- Insert one of the pry tools under a top corner and the other tool under the side of the same corner. Make sure to get under the metal of the keyboard, not just the first layer of plastic. Then pry the corner down and out from under the little overhang its sitting under.
- Next, slide the pry tool on the top over to the next overhang and insert the second tool on the other side. Push down and pry out the keyboard.
- Repeat the same process all the way down to the opposite corner.
Insert one of the pry tools under a top corner and the other tool under the side of the same corner. Make sure to get under the metal of the keyboard, not just the first layer of plastic. Then pry the corner down and out from under the little overhang its sitting under.
Next, slide the pry tool on the top over to the next overhang and insert the second tool on the other side. Push down and pry out the keyboard.
Repeat the same process all the way down to the opposite corner.
Step 4
- Once the keyboard is free, lift it up slightly and release the cable connection underneath.
Once the keyboard is free, lift it up slightly and release the cable connection underneath.
Step 5
- Last, remove the keyboard completely from the computer.
Last, remove the keyboard completely from the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Kelly Greeling
Member since: 02/07/2017
1,028 Reputation
10 Guides authored
Badges:
8
+5 more badges
Team
University of Illinois Urbana-Champaign, Team 1-1, Scrogum Spring 2017
Member of University of Illinois Urbana-Champaign, Team 1-1, Scrogum Spring 2017
UICU-SCROGUM-S17S1G1
3 Members
19 Guides authored