Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

3

  • Battery
  • 2 steps
  • Underpanel
  • 3 steps
  • Random Access Memory (RAM)
  • 2 steps

Flags

2

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackAsus U50F-RBBAG05

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the laptop over so the bottom is facing up.
  • Slide the two tabs on the bottom of the laptop toward the edges of laptop.
  • Slide the left tab to the left to lock it into the unlocked position. The red showing next to the tab signifies that it’s unlocked.
  • You will have to hold the right tab to the right to keep the slot unlocked while removing the battery.

Turn the laptop over so the bottom is facing up.

Slide the two tabs on the bottom of the laptop toward the edges of laptop.

Slide the left tab to the left to lock it into the unlocked position. The red showing next to the tab signifies that it’s unlocked.

You will have to hold the right tab to the right to keep the slot unlocked while removing the battery.

1024

Step 2

  • Hold down the tab on the right side, then begin sliding the battery out.
  • Remove the old battery.
  • Next, insert the new battery into the empty slot. Release the right tab to begin locking the new battery into place. Slide the left tab to the right to completely lock the battery into the slot. The red that was showing near the left tab should be gone. This signifies that the battery is locked into place.

Hold down the tab on the right side, then begin sliding the battery out.

Remove the old battery.

Next, insert the new battery into the empty slot. Release the right tab to begin locking the new battery into place. Slide the left tab to the right to completely lock the battery into the slot. The red that was showing near the left tab should be gone. This signifies that the battery is locked into place.

Step 3

              Underpanel
  • Remove the six screws using a Phillips #1 screwdriver.

Remove the six screws using a Phillips #1 screwdriver.

Step 4

  • Pry the lower panel up with your fingernail or a spudger.

Pry the lower panel up with your fingernail or a spudger.

Step 5

  • Lift up on the panel and remove it.

Lift up on the panel and remove it.

Step 6

              Random Access Memory (RAM)
  • Push back on the silver clips shown in the picture until you hear/feel a pop.

Push back on the silver clips shown in the picture until you hear/feel a pop.

Step 7

  • Pull back on the RAM card and remove it.
  • Repeat for the lower RAM card.

Pull back on the RAM card and remove it.

Repeat for the lower RAM card.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Kelly Greeling

Member since: 02/07/2017

1,028 Reputation

                                      10 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of Illinois Urbana-Champaign, Team 1-1, Scrogum Spring 2017                        

                                                  Member of University of Illinois Urbana-Champaign, Team 1-1, Scrogum Spring 2017 



                    UICU-SCROGUM-S17S1G1                     


                                            3 Members                     


                                            19 Guides authored