Asus U52F Bbg6 Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Back Cover
6 steps
Keyboard
2 steps

Flags

BackASUS U52F-BBG6
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Flip the laptop over to the back.
Slide the right latch to unlock, then simultaneously slide the left latch outward while pulling the battery out.

Flip the laptop over to the back.

Slide the right latch to unlock, then simultaneously slide the left latch outward while pulling the battery out.

1024

Step 2

Unscrew all twelve 3mm Phillips screws with the J1 screwdriver.
Unscrew two 3mm Phillips screws on the black panel using the PH0 screwdriver.
Lift the black panel upward by inserting your fingernail in the space provided.

Unscrew all twelve 3mm Phillips screws with the J1 screwdriver.

Unscrew two 3mm Phillips screws on the black panel using the PH0 screwdriver.

Lift the black panel upward by inserting your fingernail in the space provided.

Step 3

In the RAM and hard drive compartment, unscrew the four 3mm Phillips screws using the J1 screwdriver.
Gently pull out the hard drive.

In the RAM and hard drive compartment, unscrew the four 3mm Phillips screws using the J1 screwdriver.

Gently pull out the hard drive.

Step 4

Unscrew six 3mm Phillips screws in the RAM and hard drive compartment with the J1 screwdriver.

Unscrew six 3mm Phillips screws in the RAM and hard drive compartment with the J1 screwdriver.

Step 5

Pull the CD drive outward with your left hand.

Pull the CD drive outward with your left hand.

Step 6

Insert and gently twist the flat metal spudger between the keyboard assembly and the bottom plastic cover so that a small seam is opened.
Put in the metal spudger in the seam to hold its place while twisting and levering the flat metal spudger along the whole keyboard.
Be careful not to hit any of the internals with the metal spudger. The regular black nylon spudger should be used whenever possible, especially around batteries or sensitive internal components.
You will need add a lot of pressure to open the laptop. Expect to hear snaps as the clips holding the two pieces are released.
Slowly pry off the back

Insert and gently twist the flat metal spudger between the keyboard assembly and the bottom plastic cover so that a small seam is opened.

Put in the metal spudger in the seam to hold its place while twisting and levering the flat metal spudger along the whole keyboard.

Be careful not to hit any of the internals with the metal spudger. The regular black nylon spudger should be used whenever possible, especially around batteries or sensitive internal components.

You will need add a lot of pressure to open the laptop. Expect to hear snaps as the clips holding the two pieces are released.

Slowly pry off the back

Step 7

              Keyboard

Unlatch the clip attaching the white flattened flexible cord with a blue tip to the circuit board with your thumb.
Pull out the white flattened cord.

Unlatch the clip attaching the white flattened flexible cord with a blue tip to the circuit board with your thumb.

Pull out the white flattened cord.

Step 8

Pull back yellow tape attaching the metal colored flexible flattened cord to the circuit board.
Lift up the latch at the end of the cord.
Pull out the cord to release the keyboard.

Pull back yellow tape attaching the metal colored flexible flattened cord to the circuit board.

Lift up the latch at the end of the cord.

Pull out the cord to release the keyboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Ashley DeHuff

Member since: 09/15/2016

840 Reputation

                                      8 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       CSU Fullerton, Team 1-3, Bruce Fall 2016                        

                                                  Member of CSU Fullerton, Team 1-3, Bruce Fall 2016 



                    CSUF-BRUCE-F16S1G3                     


                                            4 Members                     


                                            9 Guides authored

love4talent - Aug 4, 2017

How do you remove the keyboard from the palm rest is what I’d like to know…what a goofy design

Introduction#

What you need#

Team#

Introduction

What you need

Team