Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

1

  • Display Assembly
  • 6 steps

Flags

0

  • BackASUS U57A-BBL4

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Display Assembly
  • Carefully pry the two rubber covers at the bottom of the screen off with a metal sprudger.

Carefully pry the two rubber covers at the bottom of the screen off with a metal sprudger.

1024

Step 2

  • Remove the two 1.84 mm Phillips head screws at the bottom of the screen using PH00 screw driver.

Remove the two 1.84 mm Phillips head screws at the bottom of the screen using PH00 screw driver.

Step 3

  • Starting from one of the corners, use your fingers to pry the bezel from the screen.
  • There is a popping sound when the bezel is loosened from the screen.

Starting from one of the corners, use your fingers to pry the bezel from the screen.

There is a popping sound when the bezel is loosened from the screen.

Step 4

  • Remove the top two 2 mm Phillips head screws.
  • Remove the four 2 mm Phillips head screws on the bottom.
  • Remove the eight 2 mm Phillips head screws on the sides of the screen. There are four on each side.
  • There are 14 screws in total: two on the top, four on the bottom, and four on each side. Use PH00 screw-driver for removing all 14 screws.

Remove the top two 2 mm Phillips head screws.

Remove the four 2 mm Phillips head screws on the bottom.

Remove the eight 2 mm Phillips head screws on the sides of the screen. There are four on each side.

There are 14 screws in total: two on the top, four on the bottom, and four on each side. Use PH00 screw-driver for removing all 14 screws.

Step 5

  • Don’t tear off the bottom of the screen or you might damage the connector cable.
  • Carefully lower the screen from the casing with your fingers, making sure to keep the bottom intact and lay it face down on the keyboard.

Don’t tear off the bottom of the screen or you might damage the connector cable.

Carefully lower the screen from the casing with your fingers, making sure to keep the bottom intact and lay it face down on the keyboard.

Step 6

  • Disconnect the connector cable at the bottom by loosening the adhesive tape and lifting up.
  • Gently slide the cable out of the ridges to free the screen from the casing.

Disconnect the connector cable at the bottom by loosening the adhesive tape and lifting up.

Gently slide the cable out of the ridges to free the screen from the casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Isabella Bernardi

Member since: 10/18/2017

671 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S2-G4, Julie Fall 2017                        

                                                  Member of UMass Dartmouth, Team S2-G4, Julie Fall 2017 



                    UMASSD-JULIE-F17S2G4                     


                                            3 Members                     


                                            6 Guides authored