Asus Ul80J Screen Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 minutes            

Sections

2

• Battery
• 3 steps
• Screen
• 4 steps

Flags

0

• BackAsus UL80J

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Place laptop face down with battery facing up.

Place laptop face down with battery facing up.

1024

Step 2

• Slide unlock button to the right.

Slide unlock button to the right.

Step 3

• Slide the button marked with an arrow to the left. The battery should now unclick. Slide the battery away from the laptop to remove it.

Slide the button marked with an arrow to the left. The battery should now unclick. Slide the battery away from the laptop to remove it.

Step 4

              Screen               

• Flip laptop back over and open it so that the screen faces you. Several rubber cushions hide screws around the bezel (surrounding frame). Remove these first to get to the screws underneath. The two bottom covers are stickers. Then remove all screws holding the bezel in place.
• There will be four 3 mm screws located on the top and two 5 mm screws located on the bottom of the bezel.

Flip laptop back over and open it so that the screen faces you. Several rubber cushions hide screws around the bezel (surrounding frame). Remove these first to get to the screws underneath. The two bottom covers are stickers. Then remove all screws holding the bezel in place.

There will be four 3 mm screws located on the top and two 5 mm screws located on the bottom of the bezel.

Step 5

• Next, completely remove the bezel using a plastic opening tool to work your way around while gently prying it from the LCD. If it does not come off with a moderate amount of force check that you did not miss any screws.

Next, completely remove the bezel using a plastic opening tool to work your way around while gently prying it from the LCD. If it does not come off with a moderate amount of force check that you did not miss any screws.

Step 6

• Unscrew the four 3 mm screws that hold the mounting brackets for the screen to the backing.

Unscrew the four 3 mm screws that hold the mounting brackets for the screen to the backing.

Step 7

• Gently lay the screen on the keyboard and remove the tape over the connection. You can then disconnect the screen.

Gently lay the screen on the keyboard and remove the tape over the connection. You can then disconnect the screen.

To reassemble your device, follow these instructions in reverse order. It is a good idea to check that the new screen works before reattaching the bezel.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Loren Plopper                     

Member since: 02/19/2017

213 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       USF Tampa, Team S2-G4, Lacy Spring 2017                        

                                                  Member of USF Tampa, Team S2-G4, Lacy Spring 2017 



                    USFT-LACY-S17S2G4                     


                                            3 Members                     


                                            7 Guides authored