Difficulty
Moderate
Steps
3
Time Required
2 minutes
Sections
1
- Keyboard
- 3 steps
Flags
0
BackASUS UX50V-RX05
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Make sure the device is powered off and the battery is removed before beginning.
- Use the Plastic Opening tool to pry the five slots up at the top of the keyboard.
Make sure the device is powered off and the battery is removed before beginning.
Use the Plastic Opening tool to pry the five slots up at the top of the keyboard.
1024
Step 2
- Lift the keyboard enough to expose the two ribbon connectors (LCD flex cable and flex band).
- Use the Plastic Opening tool to push open the two black clips on each side of the connecting cords.
- Remove the cable after pushing out the two black clips.
Lift the keyboard enough to expose the two ribbon connectors (LCD flex cable and flex band).
Use the Plastic Opening tool to push open the two black clips on each side of the connecting cords.
Remove the cable after pushing out the two black clips.
Step 3
- Push out each end of the black clip with a plastic opening tool or nylon spudger to remove the ribbon cable.
- Remove the cable after pushing out both black clips.
- Remove the keyboard.
Push out each end of the black clip with a plastic opening tool or nylon spudger to remove the ribbon cable.
Remove the cable after pushing out both black clips.
Remove the keyboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
James
Member since: 02/14/2017
663 Reputation
6 Guides authored
Badges:
7
+4 more badges
Team
USF Tampa, Team 20-2, Remmell Spring 2017
Member of USF Tampa, Team 20-2, Remmell Spring 2017
USFT-REMMELL-S17S20G2
4 Members
6 Guides authored