Difficulty

Easy

Steps

7

Time Required

                          7 minutes

Sections

2

  • Battery
  • 5 steps
  • Hard Drive
  • 2 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackAsus V500CA-DB51T

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the following ten screws securing the lower case to the upper case:
  • The top left and right corners have .7 cm screws.
  • The two top-middle and four bottom are .4 cm screws.
  • The middle left and right are .8 cm screws.
  • Remove the screws using the Phillips #00 screwdriver.

Remove the following ten screws securing the lower case to the upper case:

The top left and right corners have .7 cm screws.

The two top-middle and four bottom are .4 cm screws.

The middle left and right are .8 cm screws.

Remove the screws using the Phillips #00 screwdriver.

1024

Step 2

  • Wedge your fingers between the upper case and the lower case.
  • Gently pull the lower case away from the upper case.
  • Remove the lower case and set it aside.

Wedge your fingers between the upper case and the lower case.

Gently pull the lower case away from the upper case.

Remove the lower case and set it aside.

Step 3

  • Use the flat end of the blue plastic opening tool to lift the battery connector up out of its socket on the motherboard.

Use the flat end of the blue plastic opening tool to lift the battery connector up out of its socket on the motherboard.

Step 4

  • Remove the tri-point screws that secure the battery to the casing.
  • All screws securing the battery in place are .5 cm tri-point screws.

Remove the tri-point screws that secure the battery to the casing.

All screws securing the battery in place are .5 cm tri-point screws.

Step 5

  • Use the opening tool to pop up the battery away from the casing.

Use the opening tool to pop up the battery away from the casing.

Step 6

              Hard Drive
  • Remove the following screws securing the battery connector board to the logic board:
  • The red screws are size 2.3 cm T6 Torx
  • The orange screws are size 2.4 cm T6 Torx

Remove the following screws securing the battery connector board to the logic board:

The red screws are size 2.3 cm T6 Torx

The orange screws are size 2.4 cm T6 Torx

Step 7

  • Remove the SSD (Solid State Drive) assembly from the upper case.

Remove the SSD (Solid State Drive) assembly from the upper case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Galen P Garofalo

Member since: 10/17/2017

664 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team S6-G2, Rockett Fall 2017                        

                                                  Member of UMass Dartmouth, Team S6-G2, Rockett Fall 2017 



                    UMASSD-ROCKETT-F17S6G2                     


                                            3 Members                     


                                            6 Guides authored