Difficulty
Moderate
Steps
11
Time Required
1 hour
Sections
4
- Battery
- 1 step
- Keyboard
- 3 steps
- Asus V6800V Lower Case Disassembly
- 5 steps
- Speakers
- 2 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Better Introduction
Improve this guide by completing or revising its introduction.
BackAsus V6800V
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Place the computer upside down.
- Using your thumbs, slide both latches away from each other (towards the outside).
- Push the battery out with your fingers.
- The actual battery is not pictured.
Place the computer upside down.
Using your thumbs, slide both latches away from each other (towards the outside).
Push the battery out with your fingers.
The actual battery is not pictured.
1024
Step 2
Keyboard
- Using a Phillips #0 screwdriver, remove the two screws from the case.
- These screws should have a “K” symbol next to them.
Using a Phillips #0 screwdriver, remove the two screws from the case.
These screws should have a “K” symbol next to them.
Step 3
- Locate the four tabs above the F1, F10, INSERT, and between the F5 and F6 keys.
- Starting with the tab above the F1 key, press the tabs inward using your fingernail or spudger. Continue this process for the rest of the tabs.
- Once all four tabs have been released, the top half of the keyboard should be free.
Locate the four tabs above the F1, F10, INSERT, and between the F5 and F6 keys.
Starting with the tab above the F1 key, press the tabs inward using your fingernail or spudger. Continue this process for the rest of the tabs.
Once all four tabs have been released, the top half of the keyboard should be free.
Step 4
- Pull the keyboard up from the top at a 45 degree angle. Place it upside down on the touchpad.
- Pull the wide ribbon cable laterally from its socket on the motherboard to free the keyboard.
Pull the keyboard up from the top at a 45 degree angle. Place it upside down on the touchpad.
Pull the wide ribbon cable laterally from its socket on the motherboard to free the keyboard.
Step 5
Asus V6800V Lower Case Disassembly
- Using a Phillips #0 screwdriver, remove the screws at the bottom of the chassis to remove the top panel.
- This will allow the lower case to be removed from the rest of the computer.
Using a Phillips #0 screwdriver, remove the screws at the bottom of the chassis to remove the top panel.
This will allow the lower case to be removed from the rest of the computer.
Step 6
- Remove the six screws from below the keyboard with a Phillips #0 screwdriver.
Remove the six screws from below the keyboard with a Phillips #0 screwdriver.
Step 7
- Use your fingernails or a pry tool to gently separate both halves of the case. Begin at the front and work around the entire case.
- Be cautious not to damage the cables that connect both sides of the case.
Use your fingernails or a pry tool to gently separate both halves of the case. Begin at the front and work around the entire case.
Be cautious not to damage the cables that connect both sides of the case.
Step 8
- Remove the internal cables from front to back.
- Use your fingers to gently remove the cables from their sockets.
- The cables that connect the display to the main chassis are difficult to pull out using your fingers. A tool, such as tweezers, may be needed.
Remove the internal cables from front to back.
Use your fingers to gently remove the cables from their sockets.
The cables that connect the display to the main chassis are difficult to pull out using your fingers. A tool, such as tweezers, may be needed.
Step 9
- After separating the top and bottom halves of the case, lay them flat on the work area.
After separating the top and bottom halves of the case, lay them flat on the work area.
Step 10
Speakers
- Remove the four screws using a Phillips #0 screwdriver.
- Remove the protective metal plates with your hands.
Remove the four screws using a Phillips #0 screwdriver.
Remove the protective metal plates with your hands.
Step 11
- Make sure all cables and wires are disconnected.
- Remove the speakers from the case with your hands.
Make sure all cables and wires are disconnected.
Remove the speakers from the case with your hands.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 12 other contributors
Jong Park
Member since: 06/24/2010
114 Reputation
5 Guides authored
Badges:
6
+3 more badges
Team
Cal Poly, Team 2-9, Johann Summer 2010
Member of Cal Poly, Team 2-9, Johann Summer 2010
CPSU-JOHANN-R10S2G9
5 Members
10 Guides authored
