Difficulty

Easy

Steps

7

Time Required

                          20 minutes            

Sections

1

  • HDD RAM
  • 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackASUS Vivo AiO V241IC

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This is my first replacement guide - i hope it will be helpful for you :)

What you need

Step 1

              Remove 4 screws               
  • Power off your device
  • Place it horizontaly on the stable ground
  • Remove 4 screws at the bottom of the display
  • Take grey panel from the sides and pull it up
  • Be careful to pulling up - there are two connectors, which goes from display to motherboard. You can safelly lift display for 5-7 cm (like on the photo)

Power off your device

Place it horizontaly on the stable ground

Remove 4 screws at the bottom of the display

Take grey panel from the sides and pull it up

Be careful to pulling up - there are two connectors, which goes from display to motherboard. You can safelly lift display for 5-7 cm (like on the photo)

1024

Step 2

              Lift up display               
  • After disconnecting two connectors from the motherboard you can lift display up
  • There is an also connector to display from motherboard and do not hurry to lift up display
  • There is no metal cover from the motherboard on this photo

After disconnecting two connectors from the motherboard you can lift display up

There is an also connector to display from motherboard and do not hurry to lift up display

There is no metal cover from the motherboard on this photo

Step 3

              HDD               
  • Now you can see motherboard, covered up by metal cover
  • HDD - on the left side. Remove screws and pull HDD-case

Now you can see motherboard, covered up by metal cover

HDD - on the left side. Remove screws and pull HDD-case

Step 4

              RAM               
  • Remove screws from the metal cover and pull up - you can see the motherboard
  • RAM - 2 Slots, DDR4 2400 Mhz

Remove screws from the metal cover and pull up - you can see the motherboard

RAM - 2 Slots, DDR4 2400 Mhz

Step 5

              Motherboard front side overview               
  • Here you can find more details of the V241ICR-R rev 2.0 mainboard.
  • This refers to V241ICGK-BA111T model of the PC

Here you can find more details of the V241ICR-R rev 2.0 mainboard.

This refers to V241ICGK-BA111T model of the PC

Step 6

              Accessing SSD slot               
  • Remove all marked screws to get to the other side of the mainboard.
  • Dont forget the central one, the Fan and all the cables before lifting the MB. It goes up easy but may be some sticky glue below.

Remove all marked screws to get to the other side of the mainboard.

Dont forget the central one, the Fan and all the cables before lifting the MB. It goes up easy but may be some sticky glue below.

Step 7

              Motherboard back side overview               
  • Here you can find NGFF M.2 (key M) slot for 2280 size SSD.
  • Install any AHCI (mSATA) SSD. Modules with both keys B+M are OK. Note that NVME and other PCI-E/USB modules are NOT supported.
  • You may need an extra srew to fix your new SSD in the slot.
  • Reasseble the system in reverse order

Here you can find NGFF M.2 (key M) slot for 2280 size SSD.

Install any AHCI (mSATA) SSD. Modules with both keys B+M are OK. Note that NVME and other PCI-E/USB modules are NOT supported.

You may need an extra srew to fix your new SSD in the slot.

Reasseble the system in reverse order

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      13 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Konstantin Epikhin                     

Member since: 09/20/2017

447 Reputation

                                      1 Guide authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Viktor Che - Nov 26, 2017

Reply

Приветствую, Константин. Спасибо за подробный отчет по разбору. Сейчас стоит вопрос о приобретении такого же моноблока, однако есть важный нюанс, который меня интересует. Планирую сразу поставить SSD, но 1ТБ жесткий диск хотелось бы оставить как второй накопитель. На сайте производителя заявлено, что в топовой комплектации наряду с 1Тб HDD установлен ещё и SSD стандарта M2 (https://www.asus.com/All-in-One-PCs/Vivo...). У вас на 2 шаге, третье фото видна сама материнская плата, однако не совсем понятно есть ли на ней такой разъем. Есть что-то похожее на него в верхнем правом углу, как раз где вы красным прямоугольником обозначили область шлейфа дисплея. Можете выложить это фото без прямоугольника в хорошем разрешении или отправить мне на почту rf_c(собака)mail.ru. Буду очень признателен!

Konstantin Epikhin - Dec 13, 2017

могу на днях посмотреть если еще актуально

Roman Vasilenko - Dec 10, 2017

Reply

инструкция хорошая, но, к сожалению, для меня не полная. после снятия крышки с материнской платы выяснилось, что память накрыта дополнительной железной крышечкой. пока думаю как ее снимать.

вы имеете ввиду крышку на материнской плате? сама память у меня не была ничем не прикрыта

разобрался. с боков крышки есть вырезы, куда можно просунуть отвертку. надо потянуть вверх - она отщелкивается (винтов нет).