Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Battery
  • 3 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackAsus VivoBook Q200E-BSI3T08

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Turn off the computer and unplug the charge cable.
  • If the computer is on or plugged in, it could cause electric shock.
  • Turn the computer upside down.

Turn off the computer and unplug the charge cable.

If the computer is on or plugged in, it could cause electric shock.

Turn the computer upside down.

1024

Step 2

  • Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).

Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).

Step 3

  • Use a plastic opening tool to gently remove the back panel.

Use a plastic opening tool to gently remove the back panel.

Step 4

              Battery
  • Remove the eight 4.7mm Philips #00 screws holding the battery in place.

Remove the eight 4.7mm Philips #00 screws holding the battery in place.

Step 5

  • The battery is attached by a set of wires.
  • Use your finger to disconnect the set of wires. It should come off very easily.

The battery is attached by a set of wires.

Use your finger to disconnect the set of wires. It should come off very easily.

Step 6

  • Now just lift the battery out of place.

Now just lift the battery out of place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      14 other people completed this guide.

Author

                                      with 5 other contributors 


                    Maxim

Member since: 01/21/2015

459 Reputation

                                      1 Guide authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       UWT Liner: Group 6                        

                                                  Member of UWT Liner: Group 6 



                    Community                     


                                            3 Members                     


                                            1 Guide authored

Albert Einstein - Jan 25, 2018

Reply

Super helpful instructions. Especially mentioning which screws were different sizes, so I knew to keep the 3 different sizes for the back cover separated and noted which sizes went back where. Many thanks!

weston.fisher - Feb 20, 2020

Reply

Great guide. Thanks!