Difficulty

Moderate

Steps

13

Time Required

                          5 - 6 minutes

Sections

3

  • Back Panel
  • 3 steps
  • Battery
  • 3 steps
  • Trackpad
  • 7 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackAsus VivoBook Q200E-BSI3T08

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Turn off the computer and unplug the charge cable.
  • If the computer is on or plugged in, it could cause electric shock.
  • Turn the computer upside down.

Turn off the computer and unplug the charge cable.

If the computer is on or plugged in, it could cause electric shock.

Turn the computer upside down.

1024

Step 2

  • Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).

Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).

Step 3

  • Use a plastic opening tool to gently remove the back panel.

Use a plastic opening tool to gently remove the back panel.

Step 4

              Battery
  • Remove the eight 4.7mm Philips #00 screws holding the battery in place.

Remove the eight 4.7mm Philips #00 screws holding the battery in place.

Step 5

  • The battery is attached by a set of wires.
  • Use your finger to disconnect the set of wires. It should come off very easily.

The battery is attached by a set of wires.

Use your finger to disconnect the set of wires. It should come off very easily.

Step 6

  • Now just lift the battery out of place.

Now just lift the battery out of place.

Step 7

              Trackpad
  • Disconnect the small blue TP(trackpad) labeled data bus.

Disconnect the small blue TP(trackpad) labeled data bus.

Step 8

  • Identify the ten 2.94mm screws on the metal bracket.

Identify the ten 2.94mm screws on the metal bracket.

Step 9

  • Unscrew the ten 2.94mm screws with the Philips #00 Head.

Unscrew the ten 2.94mm screws with the Philips #00 Head.

Step 10

  • Remove all of the metallic tape holding the metal bracket to the components surrounding it.

Remove all of the metallic tape holding the metal bracket to the components surrounding it.

Step 11

  • Lift the metal bracket away from the laptop.

Lift the metal bracket away from the laptop.

Step 12

  • Unscrew the four 3.5mm screws with Phillips #00 Head.
  • This black plastic panel holds the trackpad in place.

Unscrew the four 3.5mm screws with Phillips #00 Head.

This black plastic panel holds the trackpad in place.

Step 13

  • Lift the trackpad up from the laptop and slide it out of the housing.

Lift the trackpad up from the laptop and slide it out of the housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Mitchell Jackson

Member since: 05/17/2017

742 Reputation

                                      7 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       IUPUI, Team S4-G4, Wilson Summer 2017                        

                                                  Member of IUPUI, Team S4-G4, Wilson Summer 2017 



                    IUPUI-WILSON-SU17S4G4                     


                                            4 Members                     


                                            7 Guides authored