Asus Vivobook Q301La Bhi5T02 Fan And Heatsink Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 25 minutes

Sections

Back Cover
4 steps
Fan and Heatsink
3 steps

Flags

BackAsus Vivobook Q301LA-BHI5T02
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Make sure the computer is turned off.
Flip the device over so that the back cover is facing you.

Make sure the computer is turned off.

Flip the device over so that the back cover is facing you.

1024

Step 2

Remove the four 5mm Phillips #1 screws from the top of the laptop.
Remove the two 6mm Phillips #1 screws from the sides of the laptop.
Remove the four 2mm Phillips #1 screws from the bottom of the laptop.

Remove the four 5mm Phillips #1 screws from the top of the laptop.

Remove the two 6mm Phillips #1 screws from the sides of the laptop.

Remove the four 2mm Phillips #1 screws from the bottom of the laptop.

Step 3

Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.

Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.

Step 4

Lift off the cover and remove the back cover from the device.

Lift off the cover and remove the back cover from the device.

Step 5

              Fan and Heatsink

Using a Phillips #1 Screwdriver remove the three 3 mm black screws and four 2 mm copper screws holding the fan and heat sink in place.

Using a Phillips #1 Screwdriver remove the three 3 mm black screws and four 2 mm copper screws holding the fan and heat sink in place.

Step 6

Remove the wire connecting the fan to the motherboard.

Remove the wire connecting the fan to the motherboard.

Step 7

Gently remove the fan and heat sink from the motherboard.
On reassembly, be sure to clean the CPU and heat sink and reapply thermal compound to the CPU. Follow this guide to learn how.

Gently remove the fan and heat sink from the motherboard.

On reassembly, be sure to clean the CPU and heat sink and reapply thermal compound to the CPU. Follow this guide to learn how.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Royce Gunter

Member since: 10/02/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       USF Tampa, Team S10-G3, Thompson Fall 2017                        

                                                  Member of USF Tampa, Team S10-G3, Thompson Fall 2017 



                    USFT-THOMPSON-F17S10G3                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team