Asus Vivobook Q301La Bhi5T02 Usb Port Plate Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Back Cover
4 steps
Hard Drive
1 step
USB Port Plate
4 steps

Flags

BackAsus Vivobook Q301LA-BHI5T02
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Make sure the computer is turned off.
Flip the device over so that the back cover is facing you.

Make sure the computer is turned off.

Flip the device over so that the back cover is facing you.

1024

Step 2

Remove the four 5mm Phillips #1 screws from the top of the laptop.
Remove the two 6mm Phillips #1 screws from the sides of the laptop.
Remove the four 2mm Phillips #1 screws from the bottom of the laptop.

Remove the four 5mm Phillips #1 screws from the top of the laptop.

Remove the two 6mm Phillips #1 screws from the sides of the laptop.

Remove the four 2mm Phillips #1 screws from the bottom of the laptop.

Step 3

Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.

Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.

Step 4

Lift off the cover and remove the back cover from the device.

Lift off the cover and remove the back cover from the device.

Step 5

              Hard Drive

Slide the hard drive out of the SATA port and remove it from the device.

Slide the hard drive out of the SATA port and remove it from the device.

Step 6

              USB Port Plate

Remove the two 5.0 mm Phillips #1 screws shown.
Remove the two 3.0 mm Phillips #1 screws shown.

Remove the two 5.0 mm Phillips #1 screws shown.

Remove the two 3.0 mm Phillips #1 screws shown.

Step 7

Using a plastic opening tool, pry open the hinge shown until your fingers can fit under it.

Using a plastic opening tool, pry open the hinge shown until your fingers can fit under it.

Step 8

Pull the hinge the rest of the way up.

Pull the hinge the rest of the way up.

Step 9

Disconnect the plate from the shown connector. The USB port plate is now disconnected from your device.

Disconnect the plate from the shown connector. The USB port plate is now disconnected from your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Kevin Kochanek

Member since: 11/06/2018

181 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S5-G3, Gulbrandsen Fall 2018                        

                                                  Member of UMass Dartmouth, Team S5-G3, Gulbrandsen Fall 2018 



                    UMASSD-GULBRANDSEN-F18S5G3                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team