Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
2
- Back Case Housing
- 2 steps
- WIFI CHIP
- 3 steps
Flags
0
BackASUS Vivobook Q301LA-BSI5T17
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Case Housing
- Remove all ten 6mm Phillips #1 screws from the bottom of the computer chassis.
Remove all ten 6mm Phillips #1 screws from the bottom of the computer chassis.
1024
Step 2
- Carefully pry open the back cover from the laptop and place it to the side.
Carefully pry open the back cover from the laptop and place it to the side.
Step 3
WIFI CHIP
- Locate the wifi module on the back of your laptop.
- Use an iFixit opening tool to pry the black (Main) and the white (Aux) coaxial cable connectors upward.
Locate the wifi module on the back of your laptop.
Use an iFixit opening tool to pry the black (Main) and the white (Aux) coaxial cable connectors upward.
Step 4
- Remove the 5mm screw from the module using the Phillips PH1 screwdriver.
Remove the 5mm screw from the module using the Phillips PH1 screwdriver.
Step 5
- Gently pull the WiFi module out of its housing from the motherboard.
- Careful not to break or bend the metal contacts.
Gently pull the WiFi module out of its housing from the motherboard.
Careful not to break or bend the metal contacts.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Amrinder Singh
Member since: 04/09/2019
277 Reputation
3 Guides authored
Badges:
4
+1 more badge
Team
IUPUI, Team S1-G2, Hovde Spring 2019
Member of IUPUI, Team S1-G2, Hovde Spring 2019
IUPUI-HOVDE-S19S1G2
3 Members
4 Guides authored
