Asus Vivobook Q302La Bhi3T09 Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

1

• Hard Drive
• 5 steps

Flags

0

• BackAsus VivoBook Q302LA-BHI3T09

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Hard Drive               

• Before doing a repair or replacement make sure the laptop is fully shut off.
• Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place

Before doing a repair or replacement make sure the laptop is fully shut off.

Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place

1024

Step 2

• Insert the flat edge of the opening tool in between the back casing to remove the back casing.
• Try to use the opening tool at multiple points. Lifting the back casing abruptly could damage the laptop.

Insert the flat edge of the opening tool in between the back casing to remove the back casing.

Try to use the opening tool at multiple points. Lifting the back casing abruptly could damage the laptop.

Step 3

• Using the JIS #0 Screwdriver, remove the five 3.0 mm screws that hold down the hard drive casing.

Using the JIS #0 Screwdriver, remove the five 3.0 mm screws that hold down the hard drive casing.

Step 4

• Lift the hard drive up and remove the power supply cable connected to it.
• Make sure to pull on the plastic head and not the actual wires to prevent tearing them.

Lift the hard drive up and remove the power supply cable connected to it.

Make sure to pull on the plastic head and not the actual wires to prevent tearing them.

Step 5

• Carefully peel back and remove the plastic hard drive cover to reveal the two 3.0 mm screws on the hard drive casing.
• Using a JIS #0 screwdriver, unscrew the two 3.0 mm screws on the side of the metal casing to remove the hard drive itself.

Carefully peel back and remove the plastic hard drive cover to reveal the two 3.0 mm screws on the hard drive casing.

Using a JIS #0 screwdriver, unscrew the two 3.0 mm screws on the side of the metal casing to remove the hard drive itself.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Deric Wright                     

Member since: 02/14/2018

636 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Tampa, Team S5-G5, Eyestone Spring 2018                        

                                                  Member of USF Tampa, Team S5-G5, Eyestone Spring 2018 



                    USFT-EYESTONE-S18S5G5                     


                                            4 Members                     


                                            5 Guides authored