Asus Vivobook S200E Rhi3T73 Touchpad Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Touchpad
4 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackAsus VivoBook S200E-RHI3T73
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Touchpad

In order to remove the back lid, you must lay the laptop down with the lid closed and remove the screws with a Phillips #0 screwdriver.
There are five 80mm screws.
There are four 50mm screws.
Pull the back lid off of the laptop using your fingers.

In order to remove the back lid, you must lay the laptop down with the lid closed and remove the screws with a Phillips #0 screwdriver.

There are five 80mm screws.

There are four 50mm screws.

Pull the back lid off of the laptop using your fingers.

1024

Step 2

There should be a total of twelve 50mm screws when removing the battery.
The battery does not have to be fully removed for this step, however the screws must be taken out and the battery lifted.

There should be a total of twelve 50mm screws when removing the battery.

The battery does not have to be fully removed for this step, however the screws must be taken out and the battery lifted.

Step 3

Use the Phillips #0 screwdriver to remove the six screws attached to the silver panel.
Disconnect the LED ribbon wires using a spudger to lift the clamp.

Use the Phillips #0 screwdriver to remove the six screws attached to the silver panel.

Disconnect the LED ribbon wires using a spudger to lift the clamp.

Step 4

Using the Phillips #0 screwdriver, remove the four screws on the silver panel.
Using a spudger, gently lift the silver ground strips off of the touch pad.
Pull the touch pad up and towards the battery to remove it from the laptop.

Using the Phillips #0 screwdriver, remove the four screws on the silver panel.

Using a spudger, gently lift the silver ground strips off of the touch pad.

Pull the touch pad up and towards the battery to remove it from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors

                    Katherine Nasci

Member since: 04/01/2019

124 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team S9-G9, Wilson Spring 2019                        

                                                  Member of IUPUI, Team S9-G9, Wilson Spring 2019 



                    IUPUI-WILSON-S19S9G9                     


                                            4 Members                     


                                            2 Guides authored

Incorrect Tools#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Incorrect Tools

Introduction

What you need

Team