Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
1
- Wifi Chip
- 5 steps
Flags
0
BackAsus VivoBook S200E-RHI3T73
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Wifi Chip
- With the screen closed, place your laptop upside-down with the front facing you.
- Remove the five black 80mm Phillips #0 screws.
- Remove the four black 50mm Phillips #0 screws.
With the screen closed, place your laptop upside-down with the front facing you.
Remove the five black 80mm Phillips #0 screws.
Remove the four black 50mm Phillips #0 screws.
1024
Step 2
- Use a metal spudger to pry the bottom panel open.
- Be gentle around the edges.
- Lift the back panel to expose the inside of the laptop.
Use a metal spudger to pry the bottom panel open.
Be gentle around the edges.
Lift the back panel to expose the inside of the laptop.
Step 3
- Use a Phillips J0 screwdriver to remove the one black 3mm screw.
Use a Phillips J0 screwdriver to remove the one black 3mm screw.
Step 4
- Use an up and away motion to pull the module out of its slot.
Use an up and away motion to pull the module out of its slot.
Step 5
- Use precision tweezers to pry the black wire with a gold plug off the main gold plug on the module.
Use precision tweezers to pry the black wire with a gold plug off the main gold plug on the module.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Shilo Stuart
Member since: 04/12/2017
544 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
Eastern Washington University, Team S2-G3, Rowley Spring 2017
Member of Eastern Washington University, Team S2-G3, Rowley Spring 2017
EWU-ROWLEY-S17S2G3
4 Members
4 Guides authored
