Difficulty
Easy
Steps
6
Time Required
6 minutes
Sections
1
- Battery
- 6 steps
Flags
0
BackASUS VivoBook S300CA-BBI5T01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Place the laptop upside down so that the bottom panel is facing upwards.
Place the laptop upside down so that the bottom panel is facing upwards.
1024
Step 2
- Unscrew the following 10 screws
- Eight 5 mm Phillips head screws
- Two 10 mm Phillips head screws
Unscrew the following 10 screws
Eight 5 mm Phillips head screws
Two 10 mm Phillips head screws
Step 3
- Carefully peel the panel off of the bottom of the laptop.
Carefully peel the panel off of the bottom of the laptop.
Step 4
- Remove the 7 screws holding the battery in place.
- Six 3 mm Phillips head screws
- One 5 mm Phillips head screw
Remove the 7 screws holding the battery in place.
Six 3 mm Phillips head screws
One 5 mm Phillips head screw
Step 5
- Disconnect the one flat topped wire connector by carefully using a plastic opening tool to pry up both sides and then lifting the connector from its socket.
Disconnect the one flat topped wire connector by carefully using a plastic opening tool to pry up both sides and then lifting the connector from its socket.
Step 6
- Slide out the battery.
Slide out the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Keith Rachels
Member since: 03/04/2016
595 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team 3-4, Bhusal Spring 2016
Member of UMass Dartmouth, Team 3-4, Bhusal Spring 2016
UMASSD-BHUSAL-S16S3G4
2 Members
5 Guides authored
Konrad Aubreville - Aug 14, 2018
Reply
Make the Save ESD ?