Difficulty
Easy
Steps
6
Time Required
6 minutes
Sections
1
- Wi-Fi Card
- 6 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackASUS VivoBook S300CA-BBI5T01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Wi-Fi Card
- Place the laptop upside down so that the bottom panel is facing upwards.
Place the laptop upside down so that the bottom panel is facing upwards.
1024
Step 2
- Unscrew the following 10 screws
- Eight 5 mm Phillips head screws
- Two 10 mm Phillips head screws
Unscrew the following 10 screws
Eight 5 mm Phillips head screws
Two 10 mm Phillips head screws
Step 3
- Carefully peel the panel off of the bottom of the laptop.
Carefully peel the panel off of the bottom of the laptop.
Step 4
- Remove the one 3 mm Phillips head screw holding the Wi-Fi card in place.
Remove the one 3 mm Phillips head screw holding the Wi-Fi card in place.
Step 5
- Carefully slide the card out of its connection port by pulling it outward.
Carefully slide the card out of its connection port by pulling it outward.
Step 6
- Remove the black and white antenna cable connector wires by carefully pulling upwards on them.
- Note that the black wire connects to “Main” and the white wire connects to “Aux”.
Remove the black and white antenna cable connector wires by carefully pulling upwards on them.
Note that the black wire connects to “Main” and the white wire connects to “Aux”.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Keith Rachels
Member since: 03/04/2016
595 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team 3-4, Bhusal Spring 2016
Member of UMass Dartmouth, Team 3-4, Bhusal Spring 2016
UMASSD-BHUSAL-S16S3G4
2 Members
5 Guides authored
