Asus Vivobook S500Ca Fan Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          15 minutes            

Sections

1

• Cooling Fan
• 7 steps

Flags

0

• BackAsus Vivobook S500CA-SI50305T

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Cooling Fan               

• Turn the device over so the back plate is facing up.

Turn the device over so the back plate is facing up.

1024

Step 2

• Use a Phillips Head PH1 screwdriver to remove 10 screws around the perimeter of the back plate.
• It may be helpful to lay out the screws in the orientation in which they are taken out, in order to help remember where they go.

Use a Phillips Head PH1 screwdriver to remove 10 screws around the perimeter of the back plate.

It may be helpful to lay out the screws in the orientation in which they are taken out, in order to help remember where they go.

Step 3

• Remove the back plate by lifting it straight up.

Remove the back plate by lifting it straight up.

Step 4

• Remove 2 (.5 cm) Phillips Head screws found around the fan and 4 (.3 cm) Phillips Head screws found around the heat sink connector.

Remove 2 (.5 cm) Phillips Head screws found around the fan and 4 (.3 cm) Phillips Head screws found around the heat sink connector.

Step 5

• Unhook the electronic connection located above the fan by pulling the white connector straight out of the brown socket.
• This photo is for demonstration purposes only. Do not remove by pulling the wires. Instead, remove by pulling on the edges of the white socket.

Unhook the electronic connection located above the fan by pulling the white connector straight out of the brown socket.

This photo is for demonstration purposes only. Do not remove by pulling the wires. Instead, remove by pulling on the edges of the white socket.

Step 6

• Remove the fan and connected heat sink by lifting straight out of the assembly.

Remove the fan and connected heat sink by lifting straight out of the assembly.

Step 7

• Replace fan and follow steps 1-5 in reverse order to complete repair.

Replace fan and follow steps 1-5 in reverse order to complete repair.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Brad Shipman                     

Member since: 01/17/2017

128 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Western Carolina University, Team 1-3, Virtue Spring 2017                        

                                                  Member of Western Carolina University, Team 1-3, Virtue Spring 2017 



                    WCU-VIRTUE-S17S1G3                     


                                            4 Members                     


                                            5 Guides authored