Difficulty
Moderate
Steps
6
Time Required
1 minute
Sections
2
- Battery
- 5 steps
- CMOS Battery
- 1 step
Flags
0
BackAsus VivoBook X202E-DB21T
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the device such that the labels are on top.
- Use a Phillips #1 screwdriver to remove the four 8mm screws near the back.
- Use the same screwdriver to remove the four 5mm screws in the front.
- Use the same screwdriver to remove the single 9mm screw in the center.
- Make sure that the device is powered down and unplugged.
Flip the device such that the labels are on top.
Use a Phillips #1 screwdriver to remove the four 8mm screws near the back.
Use the same screwdriver to remove the four 5mm screws in the front.
Use the same screwdriver to remove the single 9mm screw in the center.
Make sure that the device is powered down and unplugged.
1024
Step 2
- Remove the back cover by gently prying with a spudger.
Remove the back cover by gently prying with a spudger.
Step 3
- Remove the eight 5mm screws using a Phillips #1 screwdriver.
- Do not puncture the battery.
Remove the eight 5mm screws using a Phillips #1 screwdriver.
Do not puncture the battery.
Step 4
- Disconnect the battery ribbon cable from the motherboard.
Disconnect the battery ribbon cable from the motherboard.
Step 5
- Remove the battery from the laptop.
Remove the battery from the laptop.
Step 6
CMOS Battery
- Unplug and remove the CMOS battery.
Unplug and remove the CMOS battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
John Thomas
Member since: 01/13/2019
756 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
Eastern Washington University, Team S1-G5, Crawford Winter 2019
Member of Eastern Washington University, Team S1-G5, Crawford Winter 2019
EWU-CRAWFORD-W19S1G5
4 Members
7 Guides authored
