Asus Vivobook X540Sa Bpd0602V Keyboard Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Keyboard
6 steps

Flags

BackAsus VivoBook X540
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Keyboard

Power down the laptop using the device’s power button in top right corner of the keyboard. Ensure that the device’s power cord is disconnected.

Power down the laptop using the device’s power button in top right corner of the keyboard. Ensure that the device’s power cord is disconnected.

1024

Step 2

Flip the laptop over so the back panel is displayed.

Flip the laptop over so the back panel is displayed.

Step 3

Using a Phillips #1 screwdriver, remove the ten screws from the back panel.
Remove the two battery screws (15.6 mm)
Two top corner screws (12.5 mm)
Six case screws (9.7mm)

Using a Phillips #1 screwdriver, remove the ten screws from the back panel.

Remove the two battery screws (15.6 mm)

Two top corner screws (12.5 mm)

Six case screws (9.7mm)

Step 4

Flip the laptop back over and open it, revealing the screen and keyboard.

Flip the laptop back over and open it, revealing the screen and keyboard.

Step 5

Using the blue plastic opening tool, wedge and loosen the seal all the way around the edges. Carefully lift up the keyboard panel.
When lifting the keyboard panel, do not lift it all the way as the two connection ribbons to the motherboard must be disconnected.
It is recommended to break the seal of the case starting at the upper corners closest to the display monitor .

Using the blue plastic opening tool, wedge and loosen the seal all the way around the edges. Carefully lift up the keyboard panel.

When lifting the keyboard panel, do not lift it all the way as the two connection ribbons to the motherboard must be disconnected.

It is recommended to break the seal of the case starting at the upper corners closest to the display monitor .

Step 6

Observe where the ribbons connect to the motherboard, there are two connections. Each connection has a black clamp. To remove the ribbon, lift the black clamp up to disconnect it.

Observe where the ribbons connect to the motherboard, there are two connections. Each connection has a black clamp. To remove the ribbon, lift the black clamp up to disconnect it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 9 other contributors

                    Ziyad Alharbi

Member since: 10/18/2017

118 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team S1-G111, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S1-G111, Cagle Fall 2017 



                    USFT-CAGLE-F17S1G111                     


                                            5 Members                     


                                            7 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team