Asus Vivotab Rt Tf600T Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Speaker
12 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackAsus VivoTab RT TF600T
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker

Make sure the tablet is turned off.
Remove the tablet from the attached keyboard.
To remove the keyboard, simply depress the switch on the left side of the screen and pull the tablet portion off.

Make sure the tablet is turned off.

Remove the tablet from the attached keyboard.

To remove the keyboard, simply depress the switch on the left side of the screen and pull the tablet portion off.

1024

Step 2

Rotate the device 180°, and remove the two 1.59 mm #000 screws at the bottom of the device.
Use the Phillips screwdriver size PH000 to remove the two 1.59 mm #000 screws.

Rotate the device 180°, and remove the two 1.59 mm #000 screws at the bottom of the device.

Use the Phillips screwdriver size PH000 to remove the two 1.59 mm #000 screws.

Step 3

Use the plastic opening tool to help detach the screen from the back panel.
Insert the plastic opening tool into the bottom right corner and gently start to pry off the screen.
Once the screen begins to separate from the body of the device, start working the tool around the outer edges until the entire screen becomes detached.

Use the plastic opening tool to help detach the screen from the back panel.

Insert the plastic opening tool into the bottom right corner and gently start to pry off the screen.

Once the screen begins to separate from the body of the device, start working the tool around the outer edges until the entire screen becomes detached.

Step 4

Now that the screen is completely detached, lay the back panel flat on a smooth surface.
Lift the screen to view the inside of the tablet.

Now that the screen is completely detached, lay the back panel flat on a smooth surface.

Lift the screen to view the inside of the tablet.

Step 5

Before disconnecting the display cables, turn off the switch labeled DIP; this switch is used to de-energize the system.
The battery is connected to the motherboard. To avoid any short circuiting of the device, you must place the switch labeled DIP to OFF.

Before disconnecting the display cables, turn off the switch labeled DIP; this switch is used to de-energize the system.

The battery is connected to the motherboard. To avoid any short circuiting of the device, you must place the switch labeled DIP to OFF.

Step 6

Remove the yellow tape covering the end of the cables.

Remove the yellow tape covering the end of the cables.

Step 7

After lifting the yellow tape, you should be able to see a white strip. The white strip is actually a lever.
Use the plastic opening tool to push in the levers.

After lifting the yellow tape, you should be able to see a white strip. The white strip is actually a lever.

Use the plastic opening tool to push in the levers.

Step 8

With all three white levers pushed in, gently pull on each display cable until the cable disconnects.

With all three white levers pushed in, gently pull on each display cable until the cable disconnects.

Step 9

Lift the screen upwards to remove.

Lift the screen upwards to remove.

Step 10

Turn the tablet clockwise, so the speaker is facing the right.
Use the nylon or metal spudger to pry the battery from the back panel.

Turn the tablet clockwise, so the speaker is facing the right.

Use the nylon or metal spudger to pry the battery from the back panel.

Step 11

Remove two 0.79 mm #00 screws from the speaker with a Phillips screwdriver size #00.

Remove two 0.79 mm #00 screws from the speaker with a Phillips screwdriver size #00.

Step 12

Remove the speaker with the plastic opening tool.

Remove the speaker with the plastic opening tool.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Joseph C Reneau

Member since: 10/15/2015

276 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Sam Houston State, Team 1-2, Blackburne Fall 2015                        

                                                  Member of Sam Houston State, Team 1-2, Blackburne Fall 2015 



                    SHSU-BLACKBURNE-F15S1G2                     


                                            3 Members                     


                                            5 Guides authored

Incorrect Tools#

Introduction#

What you need#

Team#

Incorrect Tools

Introduction

What you need

Team