Asus Vivotab Rt Tf600T Webcam Replacement Repair Guide

Difficulty

Very easy

Steps

Time Required

                          4 minutes

Sections

Webcam
6 steps

Flags

BackAsus VivoTab RT TF600T
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Webcam

Make sure the tablet is turned off.
Remove the tablet from the attached keyboard.
To remove the keyboard, simply depress the switch on the left side of the screen and pull the tablet portion off.

Make sure the tablet is turned off.

Remove the tablet from the attached keyboard.

To remove the keyboard, simply depress the switch on the left side of the screen and pull the tablet portion off.

1024

Step 2

Rotate the device 180°, and remove the two 1.59 mm screws at the bottom of the device.
Use the Phillips screwdriver size #000 to remove the two 1.59 mm screws.

Rotate the device 180°, and remove the two 1.59 mm screws at the bottom of the device.

Use the Phillips screwdriver size #000 to remove the two 1.59 mm screws.

Step 3

Use the plastic opening tool to help detach the screen from the back panel.
Insert the plastic opening tool into the bottom right corner and gently start to pry off the screen.
Once the screen begins to separate from the body of the device, start working the tool around the outer edges until the entire screen becomes detached.

Use the plastic opening tool to help detach the screen from the back panel.

Insert the plastic opening tool into the bottom right corner and gently start to pry off the screen.

Once the screen begins to separate from the body of the device, start working the tool around the outer edges until the entire screen becomes detached.

Step 4

Now that the screen is completely detached, lay the back panel flat on a smooth surface.
Lift the screen to view the inside of the tablet.

Now that the screen is completely detached, lay the back panel flat on a smooth surface.

Lift the screen to view the inside of the tablet.

Step 5

Before disconnecting the display cables, refer to the image to turn off the switch labeled DIP; this switch is used to de-energize the system.
The battery is connected to the motherboard. To avoid any short circuiting of the device, you must place the switch labeled DIP to OFF.

Before disconnecting the display cables, refer to the image to turn off the switch labeled DIP; this switch is used to de-energize the system.

The battery is connected to the motherboard. To avoid any short circuiting of the device, you must place the switch labeled DIP to OFF.

Step 6

Rotate the Tablet clockwise, so that the webcam is facing away from you.
Gently lift the webcam out of its socket with the precision tweezers.

Rotate the Tablet clockwise, so that the webcam is facing away from you.

Gently lift the webcam out of its socket with the precision tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Brandi Mathews

Member since: 10/13/2015

140 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Sam Houston State, Team 1-2, Blackburne Fall 2015                        

                                                  Member of Sam Houston State, Team 1-2, Blackburne Fall 2015 



                    SHSU-BLACKBURNE-F15S1G2                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team