Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Speaker
- 4 steps
Flags
0
BackAsus VivoTab Smart
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Speaker
- Power off the device before you begin disassembly.
- Place the device face down on a flat surface.
- Remove the back panel with the plastic opening tool by sliding the tool around the edge of the panel.
Power off the device before you begin disassembly.
Place the device face down on a flat surface.
Remove the back panel with the plastic opening tool by sliding the tool around the edge of the panel.
1024
Step 2
- Take care not to break the speaker wire when unplugging it from the device.
- Carefully unplug the speaker wire from the device by grabbing the wire near the white plug with tweezers and pulling gently.
Take care not to break the speaker wire when unplugging it from the device.
Carefully unplug the speaker wire from the device by grabbing the wire near the white plug with tweezers and pulling gently.
Step 3
- Remove two 2.7 mm Phillips #00 screws.
- Remove two 3.7 mm Phillips #00 screws.
Remove two 2.7 mm Phillips #00 screws.
Remove two 3.7 mm Phillips #00 screws.
Step 4
- Remove the speaker from the device by lifting up on it.
Remove the speaker from the device by lifting up on it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Zach Hatten
Member since: 10/06/2016
548 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 2-4, Sullivan Fall 2016
Member of USF Tampa, Team 2-4, Sullivan Fall 2016
USFT-SULLIVAN-F16S2G4
4 Members
5 Guides authored