Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
1
- Hard Drive
- 5 steps
Flags
0
BackAsus W2W-A1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Before disassembly, make sure the laptop is powered off and the battery is disconnected.
- Remove the two screws (size?) on the lower panel at the bottom of the laptop (identify tool to use).
Before disassembly, make sure the laptop is powered off and the battery is disconnected.
Remove the two screws (size?) on the lower panel at the bottom of the laptop (identify tool to use).
1024
Step 2
- Grab the panel and lift upwards while pulling towards yourself.
Grab the panel and lift upwards while pulling towards yourself.
Step 3
- Remove the 3 4 mm Phillips upper screws holding the hard drive down.
Remove the 3 4 mm Phillips upper screws holding the hard drive down.
Step 4
- Pull the hard drive towards yourself to disconnect it from the laptop.
Pull the hard drive towards yourself to disconnect it from the laptop.
Step 5
- Lift the hard drive upwards to remove it from the laptop.
Lift the hard drive upwards to remove it from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Nolan Schock
Member since: 04/14/2014
501 Reputation
5 Guides authored
Badges:
6
+3 more badges
Team
Cal Poly, Team 13-29, Maness Spring 2014
Member of Cal Poly, Team 13-29, Maness Spring 2014
CPSU-MANESS-S14S13G29
4 Members
8 Guides authored
