Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Speaker
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackAsus X200CA-HCL 1104G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Speaker
- Using the Phillips 1 screwdriver, remove the laptop’s back panel.
- Pry open the Keyboard/Touch pad.
- Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.
Using the Phillips 1 screwdriver, remove the laptop’s back panel.
Pry open the Keyboard/Touch pad.
Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.
1024
Step 2
- Detach keyboard and touch screen cables
- These are the cable that are holding the keyboard and touch screen together
Detach keyboard and touch screen cables
These are the cable that are holding the keyboard and touch screen together
Step 3
- Unclip the connector that is located above touch screen
Unclip the connector that is located above touch screen
Step 4
- Use tweezers to remove the speaker bar that is located beneath the touch screen.
- Once removed carefully disconnect the clip to the left of the speaker.
Use tweezers to remove the speaker bar that is located beneath the touch screen.
Once removed carefully disconnect the clip to the left of the speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Svetlana Pimentel
Member since: 10/17/2017
201 Reputation
2 Guides authored
Badges:
3
Team
UMass Dartmouth, Team S1-G2, Simcock Fall 2017
Member of UMass Dartmouth, Team S1-G2, Simcock Fall 2017
UMASSD-SIMCOCK-F17S1G2
3 Members
5 Guides authored