Difficulty

Moderate

Steps

7

Time Required

                          20 - 30 minutes            

Sections

2

  • Keyboard Assembly
  • 2 steps
  • Battery
  • 5 steps

Flags

0

  • BackAsus X200MA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel               
  • Remove the following six screws:
  • Six 4 mm screws using a Phillips #0 screwdriver.
  • Remove the following one screw:
  • One 14 mm screw using a Phillips #0 screwdriver.
  • The 14mm screw goes in the center.

Remove the following six screws:

Six 4 mm screws using a Phillips #0 screwdriver.

Remove the following one screw:

One 14 mm screw using a Phillips #0 screwdriver.

The 14mm screw goes in the center.

1024

Step 2

  • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

Step 3

              Battery               
  • Take two rubber caps off the back side of the laptop.

Take two rubber caps off the back side of the laptop.

Step 4

  • Remove the following two screws under the rubber caps.
  • Two 14 mm screws using the Phillips #0 screw driver.

Remove the following two screws under the rubber caps.

Two 14 mm screws using the Phillips #0 screw driver.

Step 5

  • Flip up the following:
  • The two latches holding the two cables shown(white and black)
  • Pull the cables free from the latches
  • Lift the keyboard from the computer

Flip up the following:

The two latches holding the two cables shown(white and black)

Pull the cables free from the latches

Lift the keyboard from the computer

Step 6

  • Remove the following screws from the inside of the laptop:
  • Two 4 mm screws using the Phillips #0 phillips screwdriver.
  • One 5 mm screw using the Phillips #0 Phillips screwdriver located in the center a little below the battery.

Remove the following screws from the inside of the laptop:

Two 4 mm screws using the Phillips #0 phillips screwdriver.

One 5 mm screw using the Phillips #0 Phillips screwdriver located in the center a little below the battery.

Step 7

  • Slide the battery up and out.

Slide the battery up and out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      28 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Vanessa Garcia                     

Member since: 01/22/2015

1,742 Reputation

                                      6 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges                           

Team

                       Cal Poly, Team 21-24, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 21-24, Maness Winter 2015 



                    CPSU-MANESS-W15S21G24                     


                                            4 Members                     


                                            8 Guides authored                     

Patricia Domalain - Sep 11, 2016

Reply

Merci super!

nathaniel forward - Sep 9, 2017

Reply

Thanks for the write up! Easy to follow, Great photos, and worked great!

iqbal nasution - Sep 28, 2017

Reply

thanks it worked

Fernando H - Nov 21, 2017

Reply

Your step by step instructions were so easy to follow. Great job. Thanks! :)

jagadeeshkumar maddala - Sep 27, 2018

Reply

I would like to buy a battery to it, Please suggest me the best portal site