Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

3

  • Keyboard Assembly
  • 2 steps
  • Battery
  • 5 steps
  • Fan
  • 3 steps

Flags

0

  • BackAsus X200MA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Panel
  • Remove the following six screws:
  • Six 4 mm screws using a Phillips #0 screwdriver.
  • Remove the following one screw:
  • One 14 mm screw using a Phillips #0 screwdriver.
  • The 14mm screw goes in the center.

Remove the following six screws:

Six 4 mm screws using a Phillips #0 screwdriver.

Remove the following one screw:

One 14 mm screw using a Phillips #0 screwdriver.

The 14mm screw goes in the center.

1024

Step 2

  • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

Step 3

              Battery
  • Take two rubber caps off the back side of the laptop.

Take two rubber caps off the back side of the laptop.

Step 4

  • Remove the following two screws under the rubber caps.
  • Two 14 mm screws using the Phillips #0 screw driver.

Remove the following two screws under the rubber caps.

Two 14 mm screws using the Phillips #0 screw driver.

Step 5

  • Flip up the following:
  • The two latches holding the two cables shown(white and black)
  • Pull the cables free from the latches
  • Lift the keyboard from the computer

Flip up the following:

The two latches holding the two cables shown(white and black)

Pull the cables free from the latches

Lift the keyboard from the computer

Step 6

  • Remove the following screws from the inside of the laptop:
  • Two 4 mm screws using the Phillips #0 phillips screwdriver.
  • One 5 mm screw using the Phillips #0 Phillips screwdriver located in the center a little below the battery.

Remove the following screws from the inside of the laptop:

Two 4 mm screws using the Phillips #0 phillips screwdriver.

One 5 mm screw using the Phillips #0 Phillips screwdriver located in the center a little below the battery.

Step 7

  • Slide the battery up and out.

Slide the battery up and out.

Step 8

              Fan
  • Remove the Two 4 mm screws using Phillips #0 phillips screwdriver.

Remove the Two 4 mm screws using Phillips #0 phillips screwdriver.

Step 9

  • Unplug the set of wires located at bottom corner on fan.

Unplug the set of wires located at bottom corner on fan.

Step 10

  • Lift up and out to completely the remove fan component.

Lift up and out to completely the remove fan component.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors 


                    Vanessa Garcia

Member since: 01/22/2015

1,742 Reputation

                                      6 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       Cal Poly, Team 21-24, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 21-24, Maness Winter 2015 



                    CPSU-MANESS-W15S21G24                     


                                            4 Members                     


                                            8 Guides authored