Difficulty

Moderate

Steps

5

Time Required

                          15 minutes

Sections

2

  • Keyboard Assembly
  • 2 steps
  • Hard Drive
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAsus X200MA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Panel
  • Remove the following six screws:
  • Six 4 mm screws using a Phillips #0 screwdriver.
  • Remove the following one screw:
  • One 14 mm screw using a Phillips #0 screwdriver.
  • The 14mm screw goes in the center.

Remove the following six screws:

Six 4 mm screws using a Phillips #0 screwdriver.

Remove the following one screw:

One 14 mm screw using a Phillips #0 screwdriver.

The 14mm screw goes in the center.

1024

Step 2

  • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

Step 3

              Hard Drive
  • Remove the black foam and adhesive located on top of the hard drive.

Remove the black foam and adhesive located on top of the hard drive.

Step 4

  • Remove the following four screws:
  • Four 4 mm Phillips #0 using a phillips screwdriver.

Remove the following four screws:

Four 4 mm Phillips #0 using a phillips screwdriver.

Step 5

  • Slide out the hard drive

Slide out the hard drive

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors 


                    Vanessa Garcia

Member since: 01/22/2015

1,742 Reputation

                                      6 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       Cal Poly, Team 21-24, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 21-24, Maness Winter 2015 



                    CPSU-MANESS-W15S21G24                     


                                            4 Members                     


                                            8 Guides authored

Matthew Miller - Sep 7, 2016

Reply

You FORGOT TO MENTION that one must remove the 2 Rubber feet to get at 2 more screws :-(((((((

luft_ha - May 22, 2019

Reply

Very poor!!! If you follow this instruction, you will destroy your Laptop. I did nearly destroying it. You did not show the 2 screws under the rubbers.

Minus 1000 points!!!