Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

2

  • Keyboard Assembly
  • 2 steps
  • Trackpad
  • 6 steps

Flags

0

  • BackAsus X200MA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Remove the following six screws:
  • Six 4 mm screws using a Phillips #0 screwdriver.
  • Remove the following one screw:
  • One 14 mm screw using a Phillips #0 screwdriver.
  • The 14mm screw goes in the center.

Remove the following six screws:

Six 4 mm screws using a Phillips #0 screwdriver.

Remove the following one screw:

One 14 mm screw using a Phillips #0 screwdriver.

The 14mm screw goes in the center.

1024

Step 2

  • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

Step 3

              Trackpad
  • Use the spudger to lift up and remove the black plastic covering.

Use the spudger to lift up and remove the black plastic covering.

Step 4

  • Remove thinner white strip by first flipping up black piece at the top of the strip with the tweezers and then pulling it out.

Remove thinner white strip by first flipping up black piece at the top of the strip with the tweezers and then pulling it out.

Step 5

              Mouse
  • Remove wider blue strip with tweezers.

Remove wider blue strip with tweezers.

Step 6

  • Remove the following eight screws:
  • Eight 3 mm screws using Phillips #0 screwdriver.

Remove the following eight screws:

Eight 3 mm screws using Phillips #0 screwdriver.

Step 7

  • Remove the following two screws after lifting metal plate off:
  • Two 2 mmm screws using a Phillips #0 screwdriver.

Remove the following two screws after lifting metal plate off:

Two 2 mmm screws using a Phillips #0 screwdriver.

Step 8

  • Use metal spudger to get in between mouse pad and keyboard and lift off.

Use metal spudger to get in between mouse pad and keyboard and lift off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Vanessa Garcia

Member since: 01/22/2015

1,742 Reputation

                                      6 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       Cal Poly, Team 21-24, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 21-24, Maness Winter 2015 



                    CPSU-MANESS-W15S21G24                     


                                            4 Members                     


                                            8 Guides authored