Difficulty

Moderate

Steps

10

Time Required

                          20 - 45 minutes

Sections

3

  • Keyboard
  • 2 steps
  • Disk Drive
  • 2 steps
  • Motherboard
  • 6 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackASUS X42J

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Keyboard
  • Make sure your device is unplugged and turned off before proceeding.
  • Using a Spudger, gently pry up the keyboard.

Make sure your device is unplugged and turned off before proceeding.

Using a Spudger, gently pry up the keyboard.

1024

Step 2

  • Rotate the keyboard to face downward.
  • Pull out the blue wiring connection. Use tweezers to make it easier to remove.

Rotate the keyboard to face downward.

Pull out the blue wiring connection. Use tweezers to make it easier to remove.

Step 3

              Disk Drive
  • Use the Phillips #0 screwdriver to remove the two screws on the back of the laptop.

Use the Phillips #0 screwdriver to remove the two screws on the back of the laptop.

Step 4

  • Slide the disk drive out of the device.

Slide the disk drive out of the device.

Step 5

              Motherboard
  • Remove all screws located on the bottom plate of the laptop, beginning with the three located underneath the disc drive.

Remove all screws located on the bottom plate of the laptop, beginning with the three located underneath the disc drive.

Step 6

  • Rotate the laptop until it is sitting face up and extract all screws exposed by removing the keyboard.

Rotate the laptop until it is sitting face up and extract all screws exposed by removing the keyboard.

Step 7

  • Pull up on the front panel using the spudger until the front panel separates from the bottom panel.

Pull up on the front panel using the spudger until the front panel separates from the bottom panel.

Step 8

  • Unscrew and remove the marked screws.

Unscrew and remove the marked screws.

Step 9

  • Separate the connectors.

Separate the connectors.

Step 10

  • Remove the motherboard from the device.

Remove the motherboard from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Robert Martinez

Member since: 09/21/2018

217 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       University of North Texas, Team S6-G2, Thompson Fall 2018                        

                                                  Member of University of North Texas, Team S6-G2, Thompson Fall 2018 



                    UNT-THOMPSON-F18S6G2                     


                                            4 Members                     


                                            6 Guides authored