Asus X44H Bbr4 Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          20 minutes            

Sections

2

• Battery
• 4 steps
• Hard Drive
• 7 steps

Flags

0

• BackASUS X44H-BBR4

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Flip the device over.

Flip the device over.

1024

Step 2

• Slide the right lock button to the unlock position.
• After it is unlocked, a red line will be visible.

Slide the right lock button to the unlock position.

After it is unlocked, a red line will be visible.

Step 3

• Slide the left lock button into the unlock position and hold.

Slide the left lock button into the unlock position and hold.

Step 4

• While holding the left lock button in the unlock position, push the battery from the center away from you.

While holding the left lock button in the unlock position, push the battery from the center away from you.

Step 5

              Hard Drive               

• Remove the two 9 mm Phillips head screws with the PH0 bit indicated by the red circles in the picture.

Remove the two 9 mm Phillips head screws with the PH0 bit indicated by the red circles in the picture.

Step 6

• Once the screws are removed, slide the back panel away from the computer.

Once the screws are removed, slide the back panel away from the computer.

Step 7

• Remove the 9mm Phillips head screw in the left bottom corner of the hard drive with the PH0 bit.

Remove the 9mm Phillips head screw in the left bottom corner of the hard drive with the PH0 bit.

Step 8

• Slide the hard drive to the left, unlocking it from its default position.

Slide the hard drive to the left, unlocking it from its default position.

Step 9

• Pull the hard drive upwards and take it out of its position.

Pull the hard drive upwards and take it out of its position.

Step 10

• Remove two 3mm Phillips head screws, one located on each side of the metal casing holding the hard drive using the PH0 bit.

Remove two 3mm Phillips head screws, one located on each side of the metal casing holding the hard drive using the PH0 bit.

Step 11

• Pull upwards on the metal casing and it will come off.

Pull upwards on the metal casing and it will come off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Devaj Ramsamooj                     

Member since: 10/21/2015

824 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       UMass Dartmouth, Team 4-3, Catania Fall 2015                        

                                                  Member of UMass Dartmouth, Team 4-3, Catania Fall 2015 



                    UMASSD-CATANIA-F15S4G3                     


                                            4 Members                     


                                            8 Guides authored