Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

2

  • Battery
  • 3 steps
  • Keyboard
  • 5 steps

Flags

0

  • BackAsus X501A-RH31

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the laptop over so that the back is facing upwards.

Turn the laptop over so that the back is facing upwards.

1024

Step 2

  • To unlock the left tab, make sure the tab on the left has red showing.

To unlock the left tab, make sure the tab on the left has red showing.

Step 3

  • To unlock the right tab, push the right slider to the left with one hand.
  • Push the battery out with the other hand.

To unlock the right tab, push the right slider to the left with one hand.

Push the battery out with the other hand.

Step 4

              Keyboard
  • Using the Phillips #00 screwdriver unscrew all nine screws from the bottom of the laptop.
  • The nine screws are 7 mm long, 4.5 mm in diameter.

Using the Phillips #00 screwdriver unscrew all nine screws from the bottom of the laptop.

The nine screws are 7 mm long, 4.5 mm in diameter.

Step 5

  • Turn the laptop over and open the top so the keyboard is facing you.

Turn the laptop over and open the top so the keyboard is facing you.

Step 6

  • Pry off the keyboard cover on the edge using the plastic opening tool.
  • Start from one side. Once it is lose, carry out the same procedure on the front and other side.
  • Only do little sections at a time as the keyboard may break if you attempt to take the whole thing off from a single point.

Pry off the keyboard cover on the edge using the plastic opening tool.

Start from one side. Once it is lose, carry out the same procedure on the front and other side.

Only do little sections at a time as the keyboard may break if you attempt to take the whole thing off from a single point.

Step 7

  • Slowly lift the keyboard upward, but do not remove completely.
  • Remove the two data cables that attach the keyboard to the motherboard.

Slowly lift the keyboard upward, but do not remove completely.

Remove the two data cables that attach the keyboard to the motherboard.

Step 8

  • Use tweezers to pull the white plastic piece up that is attached to the data cable.
  • Repeat this process for the big black cable as well.
  • Use caution when unlatching the data cables from the motherboard. The cables are extremely delicate and can break.

Use tweezers to pull the white plastic piece up that is attached to the data cable.

Repeat this process for the big black cable as well.

Use caution when unlatching the data cables from the motherboard. The cables are extremely delicate and can break.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Romana Hruby

Member since: 10/20/2017

587 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       UMass Dartmouth, Team S3-G3, Bailey Fall 2017                        

                                                  Member of UMass Dartmouth, Team S3-G3, Bailey Fall 2017 



                    UMASSD-BAILEY-F17S3G3                     


                                            3 Members                     


                                            8 Guides authored