Difficulty

Moderate

Steps

7

Time Required

                          15 - 30 minutes

Sections

2

  • Palm Rest with Keyboard and Touch Pad
  • 4 steps
  • Battery
  • 3 steps

Flags

3

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackASUS X502CA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Palm Rest with Keyboard and Touch Pad
  • Use the Phillips #00 screwdriver to remove the seven 90mm screws.
  • Use the Phillips #00 screwdriver to remove the four 50mm screws.

Use the Phillips #00 screwdriver to remove the seven 90mm screws.

Use the Phillips #00 screwdriver to remove the four 50mm screws.

1024

Step 2

  • Next, use the plastic opening tool to carefully pop off the keyboard cover panel.
  • Be cautious when pulling off the cover because there are cables you will have to disconnect before completely removing the panel.

Next, use the plastic opening tool to carefully pop off the keyboard cover panel.

Be cautious when pulling off the cover because there are cables you will have to disconnect before completely removing the panel.

Step 3

  • Lift palm rest and unplug keyboard cable and touchpad cable using tweezers. After these two cables have been unplugged you can remove the keyboard cover panel.

Lift palm rest and unplug keyboard cable and touchpad cable using tweezers. After these two cables have been unplugged you can remove the keyboard cover panel.

Step 4

  • Lift Palm Rest away.
  • Replace with new palm rest.

Lift Palm Rest away.

Replace with new palm rest.

Step 5

              Battery
  • Next, locate the battery in the front of laptop (closest to you).

Next, locate the battery in the front of laptop (closest to you).

Step 6

  • Unplug the battery from the laptop in the upper right hand corner of the battery using tweezers.
  • If battery is not unplugged, motherboard may shock you.

Unplug the battery from the laptop in the upper right hand corner of the battery using tweezers.

If battery is not unplugged, motherboard may shock you.

Step 7

  • Use the Phillips #00 Screwdriver to carefully remove the 6 screws holding the battery in place.
  • Once you have removed all six screws carefully lift the battery out and dispose.
  • Each screw is 50 mm in length and 15 mm in diameter.

Use the Phillips #00 Screwdriver to carefully remove the 6 screws holding the battery in place.

Once you have removed all six screws carefully lift the battery out and dispose.

Each screw is 50 mm in length and 15 mm in diameter.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 5 other contributors 


                    David Conner

Member since: 03/03/2015

292 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Clemson, Team 14-1, Shirley Winter 2015                        

                                                  Member of Clemson, Team 14-1, Shirley Winter 2015 



                    CLEM-SHIRLEY-W15S14G1                     


                                            5 Members                     


                                            5 Guides authored

SteveFFFFF 0 - Sep 3, 2016

Reply

Thank you for posting this