Asus X502Ca Led Board Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 minutes            

Sections

2

• Palm Rest with Keyboard and Touch Pad
• 4 steps
• LED Board
• 2 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackASUS X502CA

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Palm Rest with Keyboard and Touch Pad               

• Use the Phillips #00 screwdriver to remove the seven 90mm screws.
• Use the Phillips #00 screwdriver to remove the four 50mm screws.

Use the Phillips #00 screwdriver to remove the seven 90mm screws.

Use the Phillips #00 screwdriver to remove the four 50mm screws.

1024

Step 2

• Next, use the plastic opening tool to carefully pop off the keyboard cover panel.
• Be cautious when pulling off the cover because there are cables you will have to disconnect before completely removing the panel.

Next, use the plastic opening tool to carefully pop off the keyboard cover panel.

Be cautious when pulling off the cover because there are cables you will have to disconnect before completely removing the panel.

Step 3

• Lift palm rest and unplug keyboard cable and touchpad cable using tweezers. After these two cables have been unplugged you can remove the keyboard cover panel.

Lift palm rest and unplug keyboard cable and touchpad cable using tweezers. After these two cables have been unplugged you can remove the keyboard cover panel.

Step 4

• Lift Palm Rest away.
• Replace with new palm rest.

Lift Palm Rest away.

Replace with new palm rest.

Step 5

              LED Board               

• Use the plastic opening tool to flip up the small clamp and pull out the ribbon cable.

Use the plastic opening tool to flip up the small clamp and pull out the ribbon cable.

Step 6

• Use 1 or 2 plastic opening tools to push down the small black plastic clips.
• Pull the board up and out.

Use 1 or 2 plastic opening tools to push down the small black plastic clips.

Pull the board up and out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Beau Raymond                     

Member since: 11/06/2018

103 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team S5-G6, Gulbrandsen Fall 2018                        

                                                  Member of UMass Dartmouth, Team S5-G6, Gulbrandsen Fall 2018 



                    UMASSD-GULBRANDSEN-F18S5G6                     


                                            3 Members                     


                                            5 Guides authored