Difficulty

Moderate

Steps

7

Time Required

                          15 - 25 minutes

Sections

1

  • LCD Screen
  • 7 steps

Flags

0

  • BackASUS X553SA-BHCLN10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Video Overview

Step 1

              LCD Screen
  • Power off laptop.
  • Flip over the laptop so the model stickers are pointing towards the ceiling, and the back of the laptop is facing you.

Power off laptop.

Flip over the laptop so the model stickers are pointing towards the ceiling, and the back of the laptop is facing you.

1024

Step 2

  • Carefully insert a plastic opening tool into the top edge of the plastic cover. Slowly run the tool along the top edge to allow several small plastic clips to release.
  • Lift the plastic cover off and set it aside.

Carefully insert a plastic opening tool into the top edge of the plastic cover. Slowly run the tool along the top edge to allow several small plastic clips to release.

Lift the plastic cover off and set it aside.

Step 3

  • Using tweezers, remove the (2) two magnetic tabs covering the screws on the screen.

Using tweezers, remove the (2) two magnetic tabs covering the screws on the screen.

Step 4

  • Use a JIS #0 screwdriver to remove the two 4.5mm screws.

Use a JIS #0 screwdriver to remove the two 4.5mm screws.

Step 5

  • Insert a plastic opening tool under the edge of the laptop lid.
  • Carefully pop out the sides of the laptop by running the plastic opening tool along the edge.

Insert a plastic opening tool under the edge of the laptop lid.

Carefully pop out the sides of the laptop by running the plastic opening tool along the edge.

Step 6

  • Use a JIS #0 screwdriver to unscrew the four 3.5mm screws.

Use a JIS #0 screwdriver to unscrew the four 3.5mm screws.

Step 7

  • Carefully lift up the LCD screen.
  • Carefully remove the cable connecting the LCD to the laptop by popping up the white clip on the laptop and sliding the connector out.

Carefully lift up the LCD screen.

Carefully remove the cable connecting the LCD to the laptop by popping up the white clip on the laptop and sliding the connector out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Spencer Lee

Member since: 11/01/2018

268 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team S2-G4, Harley Fall 2018                        

                                                  Member of IUPUI, Team S2-G4, Harley Fall 2018 



                    IUPUI-HARLEY-F18S2G4                     


                                            3 Members                     


                                            2 Guides authored