Asus X533Sa Bhcln10 Optical Disc Drive Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          25 - 30 minutes            

Sections

2

• Battery
• 3 steps
• Optical Disc Drive
• 2 steps

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackASUS X553SA-BHCLN10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn over the laptop on the back panel.
• Use the Phillips #0 screwdriver to unscrew all ten screws visible on the back panel. There should be a total of ten screws: (4) four 5.5mm screws and (6) six 10.5mm screws.

Turn over the laptop on the back panel.

Use the Phillips #0 screwdriver to unscrew all ten screws visible on the back panel. There should be a total of ten screws: (4) four 5.5mm screws and (6) six 10.5mm screws.

1024

Step 2

• Turn over the laptop with the keyboard facing upwards.
• Using a small prying or opening tool, stick the prying tool under the edge of the laptop.

Turn over the laptop with the keyboard facing upwards.

Using a small prying or opening tool, stick the prying tool under the edge of the laptop.

Step 3

• After the laptop is completely pried open carefully remove the keyboard from the laptop.
• There are two small keyboard cables connecting the keyboard to the laptop. Carefully remove these by popping up the white clips holding them in place and slide the connector out.

After the laptop is completely pried open carefully remove the keyboard from the laptop.

There are two small keyboard cables connecting the keyboard to the laptop. Carefully remove these by popping up the white clips holding them in place and slide the connector out.

Step 4

              Optical Disc Drive               

• Remove all 3 screws with the screwdriver.
• The top left screw is 5.5 mm and the bottom two screws are 2.5 mm.

Remove all 3 screws with the screwdriver.

The top left screw is 5.5 mm and the bottom two screws are 2.5 mm.

Step 5

• Gently, push the optical drive part from inside to remove the drive from the motherboard socket.
• While replacing, make sure the optical drive is connected to the socket of the motherboard (denoted by the red rectangle).

Gently, push the optical drive part from inside to remove the drive from the motherboard socket.

While replacing, make sure the optical drive is connected to the socket of the motherboard (denoted by the red rectangle).

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Edmund Lee                     

Member since: 09/26/2017

473 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Tampa, Team S13-G3, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S13-G3, Boczar Fall 2017 



                    USFT-BOCZAR-F17S13G3                     


                                            5 Members                     


                                            5 Guides authored