Difficulty

Moderate

Steps

4

Time Required

                          20 minutes            

Sections

1

  • Display Panel
  • 4 steps

Flags

0

  • BackASUS X550LB-DS71

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Display Panel               
  • Flip open the laptop with the screen facing towards you.
  • Using the plastic opening tool, remove the square tape from the marked locations.
  • Use the Phillips #0 Screwdriver to remove the two 2mm screws from those locations.

Flip open the laptop with the screen facing towards you.

Using the plastic opening tool, remove the square tape from the marked locations.

Use the Phillips #0 Screwdriver to remove the two 2mm screws from those locations.

1024

Step 2

  • Using the plastic opening tool, open the front cover of the laptop.
  • It is recommended that you start from a corner and run the tool along the edge of the cover.
  • Be careful not to bend or crack the cover.

Using the plastic opening tool, open the front cover of the laptop.

It is recommended that you start from a corner and run the tool along the edge of the cover.

Be careful not to bend or crack the cover.

Step 3

  • Peel off the tape located on the left and right side of the display monitor.
  • Use the Phillips #0 screwdriver to remove the screws at the marked locations in each corner of the display.

Peel off the tape located on the left and right side of the display monitor.

Use the Phillips #0 screwdriver to remove the screws at the marked locations in each corner of the display.

Step 4

  • Place the display monitor face down to expose the ribbon connector.
  • Remove the ribbon connector to separate the display monitor from the rest of the device.

Place the display monitor face down to expose the ribbon connector.

Remove the ribbon connector to separate the display monitor from the rest of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Nathan Dyer                     

Member since: 09/25/2017

550 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team S16-G1, Eyestone Fall 2017                        

                                                  Member of USF Tampa, Team S16-G1, Eyestone Fall 2017 



                    USFT-EYESTONE-F17S16G1                     


                                            4 Members                     


                                            5 Guides authored