Asus X553Ma Bpd07051 Ram Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          30 minutes - 1 hour

Sections

Battery
6 steps
Hard Drive
2 steps
Optical Drive
2 steps
Motherboard
7 steps
RAM
1 step

Flags

BackAsus X553MA-BPD07051
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Use a Phillips #0 screwdriver (PH0 bit) to remove the four 5.0 mm screws that are securing the bottom of the laptop.
Use a Phillips #0 screwdriver (PH0 bit) to remove the six 11.0 mm screws that are securing the bottom of the laptop.

Use a Phillips #0 screwdriver (PH0 bit) to remove the four 5.0 mm screws that are securing the bottom of the laptop.

Use a Phillips #0 screwdriver (PH0 bit) to remove the six 11.0 mm screws that are securing the bottom of the laptop.

1024

Step 2

Lift the edges of the keyboard using the plastic iFixit opening tool and raise the keyboard slightly to see the inside of the laptop.
Do not lift the keyboard too high as the keyboard is connected to the motherboard by two ribbon connectors that must be detached.

Lift the edges of the keyboard using the plastic iFixit opening tool and raise the keyboard slightly to see the inside of the laptop.

Do not lift the keyboard too high as the keyboard is connected to the motherboard by two ribbon connectors that must be detached.

Step 3

Lift back the clip on the ribbon tape, and pull the tape out in order to remove the keyboard from the laptop.
Remove both pieces of the ribbon tape connecting the keyboard to the motherboard.

Lift back the clip on the ribbon tape, and pull the tape out in order to remove the keyboard from the laptop.

Remove both pieces of the ribbon tape connecting the keyboard to the motherboard.

Step 4

Remove the bundled cable connector attaching the battery to the motherboard with the plastic iFixit opening tool.
Make sure that you do not remove the entire connector by applying too much force. Only the white plastic connector should be removed from the metal part on the motherboard.

Remove the bundled cable connector attaching the battery to the motherboard with the plastic iFixit opening tool.

Make sure that you do not remove the entire connector by applying too much force. Only the white plastic connector should be removed from the metal part on the motherboard.

Step 5

Use Phillips #0 screwdriver (PH0 bit) to remove the four 6.0 mm screws attaching the battery to the laptop.

Use Phillips #0 screwdriver (PH0 bit) to remove the four 6.0 mm screws attaching the battery to the laptop.

Step 6

Lift the battery up and remove it completely from the laptop.

Lift the battery up and remove it completely from the laptop.

Step 7

              Hard Drive

Use a Phillips #0 screwdriver (PH0 bit) to remove the four 6.0 mm screws that are securing the hard drive.

Use a Phillips #0 screwdriver (PH0 bit) to remove the four 6.0 mm screws that are securing the hard drive.

Step 8

Lift the hard drive up and pull it towards the screen so that it disconnects from the motherboard.
Use caution when disconnecting the hard drive from the motherboard, so that neither connector gets broken.

Lift the hard drive up and pull it towards the screen so that it disconnects from the motherboard.

Use caution when disconnecting the hard drive from the motherboard, so that neither connector gets broken.

Step 9

              Optical Drive

Use a Phillips #0 screwdriver (PH0 bit) to remove the one 6.0 mm screw holding in the optical drive.

Use a Phillips #0 screwdriver (PH0 bit) to remove the one 6.0 mm screw holding in the optical drive.

Step 10

Gently slide the optical drive out from the motherboard.

Gently slide the optical drive out from the motherboard.

Step 11

              Motherboard

Remove the bundled cable connector that connects the fan to the motherboard using the plastic iFixit opening tool.
Remove the bundled cable connector that attaches the audio to the motherboard with the plastic iFixit opening tool.

Remove the bundled cable connector that connects the fan to the motherboard using the plastic iFixit opening tool.

Remove the bundled cable connector that attaches the audio to the motherboard with the plastic iFixit opening tool.

Step 12

Lift the metal clip holding the ZIF connector ribbon down.
Pull the ribbon out from the connector, away from the motherboard.

Lift the metal clip holding the ZIF connector ribbon down.

Pull the ribbon out from the connector, away from the motherboard.

Step 13

Use a Phillips #0 screwdriver (PH0 bit) to remove the five 6.0 mm screws attaching the motherboard to the base of the laptop.

Use a Phillips #0 screwdriver (PH0 bit) to remove the five 6.0 mm screws attaching the motherboard to the base of the laptop.

Step 14

Remove the tape from the motherboard.

Remove the tape from the motherboard.

Step 15

Lift the metal clips holding the ZIF connector down.
Push the gold metal connector away from the motherboard.
Be careful not to break the connector.

Lift the metal clips holding the ZIF connector down.

Push the gold metal connector away from the motherboard.

Be careful not to break the connector.

Step 16

Lift the coaxial connector from the wifi chip with the plastic iFixit opening tool.

Lift the coaxial connector from the wifi chip with the plastic iFixit opening tool.

Step 17

Lift the motherboard to remove it fully.
Do not pull too hard, the motherboard should come off easily once it has been separated from the base of the laptop.

Lift the motherboard to remove it fully.

Do not pull too hard, the motherboard should come off easily once it has been separated from the base of the laptop.

Step 18

RAM

Remove the RAM by lifting and pulling it up from the back of the motherboard.

Remove the RAM by lifting and pulling it up from the back of the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Stephanie DeCarvalho

Member since: 10/21/2019

842 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team S1-G4, Botvin Fall 2019                        

                                                  Member of UMass Dartmouth, Team S1-G4, Botvin Fall 2019 



                    UMASSD-BOTVIN-F19S1G4                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team