Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Keyboard
- 4 steps
Flags
0
BackASUS X553SA-BHCLN10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Power off laptop.
- Flip over the laptop so the model stickers are pointing towards the ceiling.
Power off laptop.
Flip over the laptop so the model stickers are pointing towards the ceiling.
1024
Step 2
- Use a Phillips #0 screwdriver to remove the six 10.5mm screws (shown in red).
- Use a Phillips #0 screwdriver to remove the four 5.5mm screws (shown in orange).
Use a Phillips #0 screwdriver to remove the six 10.5mm screws (shown in red).
Use a Phillips #0 screwdriver to remove the four 5.5mm screws (shown in orange).
Step 3
- Turn over the laptop with the keyboard facing upwards.
- Insert a plastic opening tool under the edge of the laptop.
Turn over the laptop with the keyboard facing upwards.
Insert a plastic opening tool under the edge of the laptop.
Step 4
- After prying open all sides of the laptop, carefully remove the keyboard from the laptop.
- Carefully remove the two cables connecting the keyboard to the laptop by popping up the white clips and sliding the connector out.
After prying open all sides of the laptop, carefully remove the keyboard from the laptop.
Carefully remove the two cables connecting the keyboard to the laptop by popping up the white clips and sliding the connector out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Spencer Lee
Member since: 11/01/2018
268 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
IUPUI, Team S2-G4, Harley Fall 2018
Member of IUPUI, Team S2-G4, Harley Fall 2018
IUPUI-HARLEY-F18S2G4
3 Members
2 Guides authored