Difficulty
Moderate
Steps
6
Time Required
15 - 30 minutes
Sections
1
- RAM
- 6 steps
Flags
0
BackAsus X555L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Flip your laptop upside down and set it on a solid surface.
- The RAM is located under the square cover on the bottom of the laptop.
Flip your laptop upside down and set it on a solid surface.
The RAM is located under the square cover on the bottom of the laptop.
1024
Step 2
- Use the plastic opening tool to remove the screw cover.
- Make sure to keep the screw cover in a safe place. It is very easy to misplace.
Use the plastic opening tool to remove the screw cover.
Make sure to keep the screw cover in a safe place. It is very easy to misplace.
Step 3
- Using a #0 Phillips screwdriver, unscrew the single 2.5mm screw on the RAM cover.
Using a #0 Phillips screwdriver, unscrew the single 2.5mm screw on the RAM cover.
Step 4
- Use the plastic opening tool to open the RAM cover.
Use the plastic opening tool to open the RAM cover.
Step 5
- With your finger, push the two metal tabs (one on each side) outward until the RAM card pops up.
With your finger, push the two metal tabs (one on each side) outward until the RAM card pops up.
Step 6
- Gently remove the RAM card.
Gently remove the RAM card.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
17 other people completed this guide.
Author
with 5 other contributors
Alex Turner
Member since: 09/28/2015
1,806 Reputation
3 Guides authored
Badges:
18
+15 more badges
Team
Eastern Washington University, Team 1-1, Matresse Fall 2015
Member of Eastern Washington University, Team 1-1, Matresse Fall 2015
EWU-MATRESSE-F15S1G1
4 Members
10 Guides authored
Bob - Jan 26, 2016
Reply
Why does my cover not have a screw? Same laptop, ASUS X555LA.
sakichri - Mar 3, 2016
Reply
Are you seeing just a plastic circle? That has to be pried off… the screw is underneath.
Ariel Bova - Apr 7, 2016
Reply
Hi! The battery have not be removed before this?
Ryan S. - Apr 16, 2017
Reply
Ariel, the battery should be removed but this creates very unnecessary strain and stress on you. This is just an expansion bay, the actual ram is soldered on the motherboard, not serviceable by the end-user. Again, this is an expansion bay so what that means is if no RAM is in the to begin with, the laptop will be fine because there is still RAM directly on the motherboard. This is just so the end-user can add more RAM if they so choose.
Brandon - Nov 4, 2019
Reply
What if it comes with 2GB RAM already in the bay? Is it okay to proceed as long as the PC is shutdown? Will I lose any information by removing the 2GB RAM stick? Thanks. (My X555LAB has 6GB RAM total but I wish to replace the 2GB with an 8GB, 12GB total, even though this PC has the i7 CPU which I heard can handle more than 12GB of RAM, something like 32GB but apparently this PC can handle only 12GB even though it has an i7 8th gen processor) Any advice?