Difficulty

Very easy

Steps

5

Time Required

                          15 minutes

Sections

2

  • Keyboard
  • 3 steps
  • DVD Drive
  • 2 steps

Flags

0

  • BackAsus X751L

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • With the screen closed, place your laptop upside-down with the front facing you.
  • Remove the six 14.6mm Phillips #00 screws.
  • Remove the four 6.6mm Phillips #00 screws.

With the screen closed, place your laptop upside-down with the front facing you.

Remove the six 14.6mm Phillips #00 screws.

Remove the four 6.6mm Phillips #00 screws.

1024

Step 2

  • Flip the laptop over and open the lid.
  • Pry around the edges of the laptop base using the plastic opening tool.
  • Prying too hard can break the plastic clips.

Flip the laptop over and open the lid.

Pry around the edges of the laptop base using the plastic opening tool.

Prying too hard can break the plastic clips.

Step 3

  • Carefully lift the keyboard up.
  • Be very careful when lifting the keyboard up. Two zero insertion force (ZIF) cables are between the keyboard assembly and the motherboard. Do not lift the assembly too high.
  • Disconnect the two ZIF connectors from the motherboard using your fingernail to lift the cream-colored tab.

Carefully lift the keyboard up.

Be very careful when lifting the keyboard up. Two zero insertion force (ZIF) cables are between the keyboard assembly and the motherboard. Do not lift the assembly too high.

Disconnect the two ZIF connectors from the motherboard using your fingernail to lift the cream-colored tab.

Step 4

              DVD Drive
  • With the keyboard panel open, face the laptop with the internal components facing towards you.
  • Remove the single 4.6mm Phillips #00 screw.

With the keyboard panel open, face the laptop with the internal components facing towards you.

Remove the single 4.6mm Phillips #00 screw.

Step 5

  • Pull the optical drive out.

Pull the optical drive out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Carl Ravina

Member since: 02/02/2017

125 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 17-2, Blackwell Spring 2017                        

                                                  Member of USF Tampa, Team 17-2, Blackwell Spring 2017 



                    USFT-BLACKWELL-S17S17G2                     


                                            4 Members                     


                                            5 Guides authored

paul pepper - Apr 6, 2019

Reply

Spot on, took away any worries…………