Asus X751L Wireless Card Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Keyboard
3 steps
Wireless Card
3 steps

Flags

BackAsus X751L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Keyboard

With the screen closed, place your laptop upside-down with the front facing you.
Remove the six 14.6mm Phillips #00 screws.
Remove the four 6.6mm Phillips #00 screws.

With the screen closed, place your laptop upside-down with the front facing you.

Remove the six 14.6mm Phillips #00 screws.

Remove the four 6.6mm Phillips #00 screws.

1024

Step 2

Flip the laptop over and open the lid.
Pry around the edges of the laptop base using the plastic opening tool.
Prying too hard can break the plastic clips.

Flip the laptop over and open the lid.

Pry around the edges of the laptop base using the plastic opening tool.

Prying too hard can break the plastic clips.

Step 3

Carefully lift the keyboard up.
Be very careful when lifting the keyboard up. Two zero insertion force (ZIF) cables are between the keyboard assembly and the motherboard. Do not lift the assembly too high.
Disconnect the two ZIF connectors from the motherboard using your fingernail to lift the cream-colored tab.

Carefully lift the keyboard up.

Be very careful when lifting the keyboard up. Two zero insertion force (ZIF) cables are between the keyboard assembly and the motherboard. Do not lift the assembly too high.

Disconnect the two ZIF connectors from the motherboard using your fingernail to lift the cream-colored tab.

Step 4

              Wireless Card

Remove the single 4.7mm PH00 screw holding the wireless card to the motherboard.

Remove the single 4.7mm PH00 screw holding the wireless card to the motherboard.

Step 5

Using your fingers, lightly lift up on the black and white antenna cords.

Using your fingers, lightly lift up on the black and white antenna cords.

Step 6

With your fingers lightly pull the wireless card out of the slot.
Make sure to keep the card parallel with the motherboard when removing from the slot.

With your fingers lightly pull the wireless card out of the slot.

Make sure to keep the card parallel with the motherboard when removing from the slot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors

                    Matthew Martin

Member since: 02/02/2017

211 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team 17-2, Blackwell Spring 2017                        

                                                  Member of USF Tampa, Team 17-2, Blackwell Spring 2017 



                    USFT-BLACKWELL-S17S17G2                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team