Difficulty
Easy
Steps
5
Time Required
3 minutes
Sections
1
- Battery
- 5 steps
Flags
0
BackAsus X751MA-DH01TQ
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the laptop upside down and locate the ten screws holding in the plate cover.
- Remove all ten screws using a small Phillips head screwdriver.
Turn the laptop upside down and locate the ten screws holding in the plate cover.
Remove all ten screws using a small Phillips head screwdriver.
1024
Step 2
- Use a plastic opening tool to pry open and separate the keyboard from the plate cover carefully.
- The actual keyboard will detach not the back cover.
Use a plastic opening tool to pry open and separate the keyboard from the plate cover carefully.
The actual keyboard will detach not the back cover.
Step 3
- The battery contains wires connecting it to a circuit board. Slowly pull up and disconnect the wires from the board by pulling on the white tab.
The battery contains wires connecting it to a circuit board. Slowly pull up and disconnect the wires from the board by pulling on the white tab.
Step 4
- Remove the two 7mm screws holding the battery in place using a Phillips #00 screwdriver.
Remove the two 7mm screws holding the battery in place using a Phillips #00 screwdriver.
Step 5
- Carefully lift the battery up out of place.
Carefully lift the battery up out of place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Lindsey Romero
Member since: 09/18/2018
174 Reputation
1 Guide authored
Badges:
2
Team
University of North Texas, Team S4-G5, Raign Fall 2018
Member of University of North Texas, Team S4-G5, Raign Fall 2018
UNT-RAIGN-F18S4G5
3 Members
3 Guides authored