Difficulty

Difficult

Steps

11

Time Required

                          15 - 20 minutes

Sections

1

  • Screen
  • 11 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAsus X751MA-DH01TQ

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Screen
  • Turn the laptop upside down.
  • Unscrew the 10 screws on the bottom of the laptop using a PH00 screwdriver bit.

Turn the laptop upside down.

Unscrew the 10 screws on the bottom of the laptop using a PH00 screwdriver bit.

1024

Step 2

  • Use a plastic opening tool to detach and take off the keyboard.

Use a plastic opening tool to detach and take off the keyboard.

Step 3

  • Remove the eight 5.5 Phillips #00 screws located at the top right and left hand side of panel.
  • There are four screws on each side.

Remove the eight 5.5 Phillips #00 screws located at the top right and left hand side of panel.

There are four screws on each side.

Step 4

  • Remove the four 4mm Phillips #00 screws on the bottom left and right of the screen.
  • There are two screws on each side.

Remove the four 4mm Phillips #00 screws on the bottom left and right of the screen.

There are two screws on each side.

Step 5

  • Insert the plastic opening tool on the side of the screen and slide it all the way around to open the screen up.

Insert the plastic opening tool on the side of the screen and slide it all the way around to open the screen up.

Step 6

  • Remove the cords on the left and right side of the screen.

Remove the cords on the left and right side of the screen.

Step 7

  • Remove the eight total screws (4 on each side) that are on the side of the white part on the back of the screen.

Remove the eight total screws (4 on each side) that are on the side of the white part on the back of the screen.

Step 8

  • Remove the two 4mm Phillips #00 screws on the top corners of the back of the screen.
  • Remove the metal bars that you have just unscrewed.

Remove the two 4mm Phillips #00 screws on the top corners of the back of the screen.

Remove the metal bars that you have just unscrewed.

Step 9

  • Peel back the bronze sticker that is connecting the white border piece to the outside edge of the screen.

Peel back the bronze sticker that is connecting the white border piece to the outside edge of the screen.

Step 10

  • Use the plastic opening tool to pry open the white part away from the screen.

Use the plastic opening tool to pry open the white part away from the screen.

Step 11

  • Pull the white part out and pull out the rest of the screen.

Pull the white part out and pull out the rest of the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Collen Bleigh

Member since: 09/18/2018

198 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       University of North Texas, Team S4-G5, Raign Fall 2018                        

                                                  Member of University of North Texas, Team S4-G5, Raign Fall 2018 



                    UNT-RAIGN-F18S4G5                     


                                            3 Members                     


                                            3 Guides authored